Re: [PATCH] Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Jun 20, 2019 at 1:31 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, Jun 20, 2019 at 11:21 AM Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
> >
> > This reverts commit 1f45e8c6d0161f044d679f242fe7514e2625af4a.
> >
> > This 100 ms mystery delay is not on downstream kernels and no longer
> > seems needed on upstream kernels either [1].  Presumably something in the
> > meantime has made things better.  A few possibilities for patches that
> > have landed in the meantime that could have made this better are
> > commit 3157694d8c7f ("pwm-backlight: Add support for PWM delays
> > proprieties."), commit 5fb5caee92ba ("pwm-backlight: Enable/disable
> > the PWM before/after LCD enable toggle."), and commit 6d5922dd0d60
> > ("ARM: dts: rockchip: set PWM delay backlight settings for Veyron")
> >
> > Let's revert and get our 100 ms back.
> >
> > [1] https://lkml.kernel.org/r/2226970.BAPq4liE1j@diego
> >
> > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > ---
> >
> >  arch/arm/boot/dts/rk3288-veyron-jaq.dts    | 1 -
> >  arch/arm/boot/dts/rk3288-veyron-jerry.dts  | 1 -
> >  arch/arm/boot/dts/rk3288-veyron-minnie.dts | 1 -
> >  arch/arm/boot/dts/rk3288-veyron-speedy.dts | 1 -
> >  4 files changed, 4 deletions(-)
>
> Maybe wait before applying.  I've been running reboot tests now with
> this patch applied (among others) and with enough reboots I managed to
> see:
>
> [    5.682418] rockchip-dp ff970000.dp: eDP link training failed (-5)
>
> I'll see if I can confirm that it's this patch and why things are
> different compared to downstream.

OK, I finally got back to this and confirmed:

1. The above error is actually somewhat harmless.  The eDP failure
will be retried automatically despite the scary message.  Specifically
see the loop in analogix_dp_bridge_enable().  I confirmed that after
seeing the error the screen came up just fine (I looked at the screen
in two actual instances but I believe it's pretty much always fine).

2. I haven't seen any evidence that the eDP link training happens any
more often with this revert in place.  Specifically, I see the same
message in the logs (at what appears to be the same rate) with or
without this revert.

3. Probably the link-training failures here are the same ones we
debugged for PSR for rk3399-gru-kevin that we fixed by making the eDP
PCLK rate exactly 24 MHz.  See <https://crrev.com/c/433393> for
details.  On rk3399-gru-kevin it was super important to resolve the
root cause of these errors because we had PSR (which meant we were
constantly taking to the eDP controller).  On rk3288-veyron devices
with no PSR the retry should be a fine solution and it doesn't seem
like a good idea to fully rejigger our clock plan to fix the root
cause.


NOTE: I saw _one_ case on rk3288-veyron-minnie where the screen looked
wonky at bootup and I saw the eDP link training error in the logs.
That's what originally made me cautious.  I haven't been able to
reproduce this, but presumably I just got super unlucky in that one
case.  I've left devices rebooting all day at work and haven't seen
the wonky screen since then.


Summary: I think this revert is just fine.


-Doug



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux