Add AO-CEC compatible string for the Amlogic SM1 SoC family, a derivate of the G12A AO-CECB controller. Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/media/meson-ao-cec.txt | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/media/meson-ao-cec.txt b/Documentation/devicetree/bindings/media/meson-ao-cec.txt index c67fc41d4aa2..ad92ee41c0dd 100644 --- a/Documentation/devicetree/bindings/media/meson-ao-cec.txt +++ b/Documentation/devicetree/bindings/media/meson-ao-cec.txt @@ -5,10 +5,12 @@ to handle communication between HDMI connected devices over the CEC bus. Required properties: - compatible : value should be following depending on the SoC : - For GXBB, GXL, GXM and G12A (AO_CEC_A module) : + For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) : "amlogic,meson-gx-ao-cec" For G12A (AO_CEC_B module) : "amlogic,meson-g12a-ao-cec" + For SM1 (AO_CEC_B module) : + "amlogic,meson-sm1-ao-cec" - reg : Physical base address of the IP registers and length of memory mapped region. @@ -16,9 +18,9 @@ Required properties: - interrupts : AO-CEC interrupt number to the CPU. - clocks : from common clock binding: handle to AO-CEC clock. - clock-names : from common clock binding, must contain : - For GXBB, GXL, GXM and G12A (AO_CEC_A module) : + For GXBB, GXL, GXM, G12A and SM1 (AO_CEC_A module) : - "core" - For G12A (AO_CEC_B module) : + For G12A, SM1 (AO_CEC_B module) : - "oscin" corresponding to entry in the clocks property. - hdmi-phandle: phandle to the HDMI controller -- 2.21.0
