Hi Lorenzo,
Thanks a lot for your comments!
> -----Original Message-----
> From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Sent: 2019年6月29日 1:06
> To: Z.q. Hou <zhiqiang.hou@xxxxxxx>
> Cc: linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> bhelgaas@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> l.subrahmanya@xxxxxxxxxxxxxx; shawnguo@xxxxxxxxxx; Leo Li
> <leoyang.li@xxxxxxx>; catalin.marinas@xxxxxxx; will.deacon@xxxxxxx;
> Mingkai Hu <mingkai.hu@xxxxxxx>; M.h. Lian <minghuan.lian@xxxxxxx>;
> Xiaowei Bao <xiaowei.bao@xxxxxxx>
> Subject: Re: [PATCHv5 10/20] PCI: mobiveil: Fix the INTx process errors
>
> On Fri, Apr 12, 2019 at 08:36:12AM +0000, Z.q. Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> >
> > In the loop block, there is not code to update the loop key, this
> > patch updates the loop key by re-read the INTx status register.
> >
> > This patch also add the clearing of the handled INTx status.
>
> This is two bugs and that requires two patches, each of them fixing a specific
> issue.
>
> So split the patch into two and repost it.
Yes, will split it.
Thanks,
Zhiqiang
> Lorenzo
>
> > Note: Need MV to test this fix.
> >
> > Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
> > driver")
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
> > Reviewed-by: Minghuan Lian <Minghuan.Lian@xxxxxxx>
> > Reviewed-by: Subrahmanya Lingappa <l.subrahmanya@xxxxxxxxxxxxxx>
> > ---
> > V5:
> > - Corrected and retouched the subject and changelog.
> >
> > drivers/pci/controller/pcie-mobiveil.c | 13 +++++++++----
> > 1 file changed, 9 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-mobiveil.c
> > b/drivers/pci/controller/pcie-mobiveil.c
> > index 4ba458474e42..78e575e71f4d 100644
> > --- a/drivers/pci/controller/pcie-mobiveil.c
> > +++ b/drivers/pci/controller/pcie-mobiveil.c
> > @@ -361,6 +361,7 @@ static void mobiveil_pcie_isr(struct irq_desc *desc)
> > /* Handle INTx */
> > if (intr_status & PAB_INTP_INTX_MASK) {
> > shifted_status = csr_readl(pcie, PAB_INTP_AMBA_MISC_STAT);
> > + shifted_status &= PAB_INTP_INTX_MASK;
> > shifted_status >>= PAB_INTX_START;
> > do {
> > for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) { @@
> -372,12
> > +373,16 @@ static void mobiveil_pcie_isr(struct irq_desc *desc)
> > dev_err_ratelimited(dev, "unexpected IRQ,
> INT%d\n",
> > bit);
> >
> > - /* clear interrupt */
> > - csr_writel(pcie,
> > - shifted_status << PAB_INTX_START,
> > + /* clear interrupt handled */
> > + csr_writel(pcie, 1 << (PAB_INTX_START + bit),
> > PAB_INTP_AMBA_MISC_STAT);
> > }
> > - } while ((shifted_status >> PAB_INTX_START) != 0);
> > +
> > + shifted_status = csr_readl(pcie,
> > + PAB_INTP_AMBA_MISC_STAT);
> > + shifted_status &= PAB_INTP_INTX_MASK;
> > + shifted_status >>= PAB_INTX_START;
> > + } while (shifted_status != 0);
> > }
> >
> > /* read extra MSI status register */
> > --
> > 2.17.1
> >
