[PATCH V5 15/18] soc/tegra: pmc: Configure core power request polarity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch configures polarity of the core power request signal
in PMC control register based on the device tree property.

PMC asserts and de-asserts power request signal based on it polarity
when it need to power-up and power-down the core rail during SC7.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 drivers/soc/tegra/pmc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 194100d77243..ed83c0cd09a3 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -56,6 +56,7 @@
 #define  PMC_CNTRL_SIDE_EFFECT_LP0	BIT(14) /* LP0 when CPU pwr gated */
 #define  PMC_CNTRL_SYSCLK_OE		BIT(11) /* system clock enable */
 #define  PMC_CNTRL_SYSCLK_POLARITY	BIT(10) /* sys clk polarity */
+#define  PMC_CNTRL_PWRREQ_POLARITY	BIT(8)
 #define  PMC_CNTRL_MAIN_RST		BIT(4)
 #define  PMC_CNTRL_LATCH_WAKEUPS	BIT(5)
 
@@ -2303,6 +2304,11 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc)
 	else
 		value |= PMC_CNTRL_SYSCLK_POLARITY;
 
+	if (pmc->corereq_high)
+		value &= ~PMC_CNTRL_PWRREQ_POLARITY;
+	else
+		value |= PMC_CNTRL_PWRREQ_POLARITY;
+
 	/* configure the output polarity while the request is tristated */
 	tegra_pmc_writel(pmc, value, PMC_CNTRL);
 
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux