From: Grzegorz Jaszczyk <jaz@xxxxxxxxxxxx> Add the corresponding entries in the COMPHY modes table. SATA support does not need any additional care. Signed-off-by: Grzegorz Jaszczyk <jaz@xxxxxxxxxxxx> [miquel.raynal@xxxxxxxxxxx: adapt the content to the mainline driver] Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index dfcff7d5dfc2..6f8ae72fb9a9 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -155,6 +155,7 @@ #define COMPHY_FW_PARAM_ETH(mode, port, speed) \ COMPHY_FW_PARAM_FULL(mode, port, speed, 0) +#define COMPHY_FW_MODE_SATA 0x1 #define COMPHY_FW_MODE_SGMII 0x2 /* SGMII 1G */ #define COMPHY_FW_MODE_HS_SGMII 0x3 /* SGMII 2.5G */ #define COMPHY_FW_MODE_USB3H 0x4 @@ -195,9 +196,11 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { /* lane 0 */ ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), + GEN_CONF(0, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), /* lane 1 */ GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D), + GEN_CONF(1, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), /* lane 2 */ @@ -206,11 +209,13 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI), GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), + GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), /* lane 3 */ ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII), ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII), ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), GEN_CONF(3, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), + GEN_CONF(3, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), /* lane 4 */ ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII), ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII), @@ -223,6 +228,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI), /* lane 5 */ ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), + GEN_CONF(5, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA), ETH_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), }; @@ -666,6 +672,10 @@ static int mvebu_comphy_power_on(struct phy *phy) dev_dbg(priv->dev, "set lane %d to USB3 mode\n", lane->id); fw_param = COMPHY_FW_PARAM(fw_mode, lane->port); break; + case PHY_MODE_SATA: + dev_dbg(priv->dev, "set lane %d to SATA mode\n", lane->id); + fw_param = COMPHY_FW_PARAM(fw_mode, lane->port); + break; default: dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode); return -ENOTSUPP; -- 2.19.1