This patch-set improves the use of eLCDIF block on iMX 8 SoCs (like 8MQ, 8MM and 8QXP). Following, are the new features added and fixes from this patch-set: 1. Add support for drm_bridge On 8MQ and 8MM, the LCDIF block is not directly connected to a parallel display connector, where an LCD panel can be attached, but instead it is connected to DSI controller. Since this DSI stands between the display controller (eLCDIF) and the physical connector, the DSI can be implemented as a DRM bridge. So, in order to be able to connect the mxsfb driver to the DSI driver, the support for a drm_bridge was needed in mxsfb DRM driver (the actual driver for the eLCDIF block). 2. Add support for additional pixel formats Some of the pixel formats needed by Android were not implemented in this driver, but they were actually supported. So, add support for them. 3. Add support for horizontal stride Having support for horizontal stride allows the use of eLCDIF with a GPU (for example) that can only output resolution sizes multiple of a power of 8. For example, 1080 is not a power of 16, so in order to support 1920x1080 output from GPUs that can produce linear buffers only in sizes multiple to 16, this feature is needed. 3. Few minor features and bug-fixing The addition of max-res DT property was actually needed in order to limit the bandwidth usage of the eLCDIF block. This is need on systems where multiple display controllers are presend and the memory bandwidth is not enough to handle all of them at maximum capacity (like it is the case on 8MQ, where there are two display controllers: DCSS and eLCDIF). The rest of the patches are bug-fixes. Mirela Rabulea (1): drm/mxsfb: Signal mode changed when bpp changed Robert Chiras (9): drm/mxsfb: Update mxsfb to support a bridge drm/mxsfb: Update mxsfb with additional pixel formats drm/mxsfb: Fix the vblank events dt-bindings: display: Add max-res property for mxsfb drm/mxsfb: Add max-res property for MXSFB drm/mxsfb: Update mxsfb to support LCD reset drm/mxsfb: Improve the axi clock usage drm/mxsfb: Clear OUTSTANDING_REQS bits drm/mxsfb: Add support for horizontal stride .../devicetree/bindings/display/mxsfb.txt | 6 + drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 290 ++++++++++++++++++--- drivers/gpu/drm/mxsfb/mxsfb_drv.c | 189 +++++++++++--- drivers/gpu/drm/mxsfb/mxsfb_drv.h | 10 +- drivers/gpu/drm/mxsfb/mxsfb_out.c | 26 +- drivers/gpu/drm/mxsfb/mxsfb_regs.h | 128 ++++++--- 6 files changed, 531 insertions(+), 118 deletions(-) -- 2.7.4
