On Wed, Jun 26, 2019 at 10:53:57AM +0800, Jitao Shi wrote:
> Add documentation for boe tv101wum-n16 panel.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> ---
> .../display/panel/boe,tv101wum-nl6.txt | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> new file mode 100644
> index 000000000000..bd44af636390
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> @@ -0,0 +1,34 @@
> +Boe Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv101wum-nl6"
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply: phandle of the regulator that provides positive voltage
> +- avee-supply: phandle of the regulator that provides negative voltage
> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> + ...
> + panel@0 {
> + compatible = "boe,tv101wum-nl6";
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + status = "okay";
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +};
> --
> 2.21.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
