Hi Vignesh, > > Subject > > [PATCH v7 3/5] mtd: Add support for HyperBus memory devices > > Cypress' HyperBus is Low Signal Count, High Performance Double Data Rate > Bus interface between a host system master and one or more slave > interfaces. HyperBus is used to connect microprocessor, microcontroller, > or ASIC devices with random access NOR flash memory (called HyperFlash) > or self refresh DRAM (called HyperRAM). > > Its a 8-bit data bus (DQ[7:0]) with Read-Write Data Strobe (RWDS) > signal and either Single-ended clock(3.0V parts) or Differential clock > (1.8V parts). It uses ChipSelect lines to select b/w multiple slaves. > At bus level, it follows a separate protocol described in HyperBus > specification[1]. > > HyperFlash follows CFI AMD/Fujitsu Extended Command Set (0x0002) similar > to that of existing parallel NORs. Since HyperBus is x8 DDR bus, > its equivalent to x16 parallel NOR flash wrt bits per clock cycle. But > HyperBus operates at >166MHz frequencies. > HyperRAM provides direct random read/write access to flash memory > array. > > But, HyperBus memory controllers seem to abstract implementation details > and expose a simple MMIO interface to access connected flash. > > Add support for registering HyperFlash devices with MTD framework. MTD > maps framework along with CFI chip support framework are used to support > communicating with flash. > > Framework is modelled along the lines of spi-nor framework. HyperBus > memory controller (HBMC) drivers calls hyperbus_register_device() to > register a single HyperFlash device. HyperFlash core parses MMIO access > information from DT, sets up the map_info struct, probes CFI flash and > registers it with MTD framework. > > Some HBMC masters need calibration/training sequence[3] to be carried > out, in order for DLL inside the controller to lock, by reading a known > string/pattern. This is done by repeatedly reading CFI Query > Identification String. Calibration needs to be done before trying to detect > flash as part of CFI flash probe. > > HyperRAM is not supported at the moment. > > HyperBus specification can be found at[1] > HyperFlash datasheet can be found at[2] > > [1] https://www.cypress.com/file/213356/download > [2] https://www.cypress.com/file/213346/download > [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf > Table 12-5741. HyperFlash Access Sequence > > Signed-off-by: Vignesh Raghavendra <vigneshr@xxxxxx> Cypress has announced the inclusion of Cypress’ high-bandwidth HyperBus™ 8-bit serial memory interface into the new eXpanded SPI (xSPI) electrical interface standard from the JEDEC Solid State Technology Association for detail, please goes to https://www.cypress.com/news/cypress-hyperbus-memory-interface-instant-applications-incorporated-jedec-xspi-electrical FYI, thanks & best regards, Mason CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. ===================================================================== ============================================================================ CONFIDENTIALITY NOTE: This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation. Macronix International Co., Ltd. =====================================================================
