Re: [PATCH 3/4] dt-bindings: display/panel: jh057n0090: Document power supply properties

[Sam Ravnborg <sam@xxxxxxxxxxxx>]

On Tue, Jun 25, 2019 at 07:05:18PM +0200, Guido Günther wrote:
> Document the vcc-supply and iovcc-supply propertes of the Rocktech
> jh057n0090 panel.
s/propertes/properties
s/jh057n0090/jh057n00900

With these fixed:
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> 
> Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
> ---
>  .../bindings/display/panel/rocktech,jh057n00900.txt          | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> index 1b5763200cf6..a372c5d84695 100644
> --- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> +++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
> @@ -5,6 +5,9 @@ Required properties:
>  - reg: DSI virtual channel of the peripheral
>  - reset-gpios: panel reset gpio
>  - backlight: phandle of the backlight device attached to the panel
> +- vcc-supply: phandle of the regulator that provides the vcc supply voltage.
> +- iovcc-supply: phandle of the regulator that provides the iovcc supply
> +  voltage.
>  
>  Example:
>  
> @@ -14,5 +17,7 @@ Example:
>  			reg = <0>;
>  			backlight = <&backlight>;
>  			reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
> +			vcc-supply = <&reg_2v8_p>;
> +			iovcc-supply = <&reg_1v8_p>;
>  		};
>  	};
> -- 
> 2.20.1