On 25.06.2019 15:51, Abel Vesa wrote: > Add the initial configuration for clocks that need default parent and rate > setting. This is based on the vendor tree clock provider parents and rates > configuration except this is doing the setup in dts rather then using clock > consumer API in a clock provider driver. > > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx> > --- > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 34 +++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > index d09b808..e0abe02 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > @@ -489,6 +489,40 @@ > + <&clk IMX8MQ_CLK_PCIE1_CTRL>, > + <&clk IMX8MQ_CLK_PCIE1_PHY>, > + <&clk IMX8MQ_CLK_PCIE2_CTRL>, > + <&clk IMX8MQ_CLK_PCIE2_PHY>, > + <&clk IMX8MQ_CLK_CSI1_CORE>, > + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, > + <&clk IMX8MQ_CLK_CSI1_ESC>, > + <&clk IMX8MQ_CLK_CSI2_CORE>, > + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, > + <&clk IMX8MQ_CLK_CSI2_ESC>; This stuff (and NAND) looks like it would belong to device nodes instead. The rest seem fine though I'm not sure why exactly those clks are adjusted in vendor tree. -- Regards, Leonard
