Re: [RFC PATCH V1 6/6] platform: mtk-isp: Add Mediatek DIP driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz,

On Tue, 2019-06-11 at 19:13 +0900, Tomasz Figa wrote:
> On Tue, Jun 11, 2019 at 7:07 PM Frederic Chen
> <frederic.chen@xxxxxxxxxxxx> wrote:
> >
> > Hi Tomasz,
> >
> >
> > On Tue, 2019-06-11 at 17:59 +0900, Tomasz Figa wrote:
> > > On Tue, Jun 11, 2019 at 5:48 PM Frederic Chen
> > > <frederic.chen@xxxxxxxxxxxx> wrote:
> > > >
> > > > Dear Tomasz,
> > > >
> > > > I'd like to elaborate more about the tuning_data.va.
> > > > Would you like to give us some advice about our improvement proposal inline?
> > > >
> > > > Thank you very much.
> > > >
> > > >
> > > > On Wed, 2019-05-22 at 03:14 +0800, Frederic Chen wrote:
> > > > > Dear Tomasz,
> > > > >
> > > > > I appreciate your comment. It is very helpful for us.
> > > > >
> > > > >
> > > > > > > diff --git a/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..54d2b5f5b802
> > > > > > > --- /dev/null
> > > > > > > +++ b/drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c
> > > > > > > @@ -0,0 +1,1384 @@
> > > >
> > > > [snip]
> > > >
> > > > > > > +static void dip_submit_worker(struct work_struct *work)
> > > > > > > +{
> > > > > > > +       struct mtk_dip_hw_submit_work *dip_submit_work =
> > > > > > > +               container_of(work, struct mtk_dip_hw_submit_work, frame_work);
> > > > > > > +       struct mtk_dip_hw *dip_hw = dip_submit_work->dip_hw;
> > > > > > > +       struct mtk_dip_dev *dip_dev = mtk_dip_hw_to_dev(dip_hw);
> > > > > > > +       struct mtk_dip_hw_work *dip_work;
> > > > > > > +       struct mtk_dip_hw_subframe *buf;
> > > > > > > +       u32 len, num;
> > > > > > > +       int ret;
> > > > > > > +
> > > > > > > +       num  = atomic_read(&dip_hw->num_composing);
> > > > > > > +
> > > > > > > +       mutex_lock(&dip_hw->dip_worklist.queuelock);
> > > > > > > +       dip_work = list_first_entry(&dip_hw->dip_worklist.queue,
> > > >
> > > > [snip]
> > > >
> > > > > > > +
> > > > > > > +       if (dip_work->frameparams.tuning_data.pa == 0) {
> > > > > > > +               dev_dbg(&dip_dev->pdev->dev,
> > > > > > > +                       "%s: frame_no(%d) has no tuning_data\n",
> > > > > > > +                       __func__, dip_work->frameparams.frame_no);
> > > > > > > +
> > > > > > > +               memcpy(&dip_work->frameparams.tuning_data,
> > > > > > > +                      &buf->tuning_buf, sizeof(buf->tuning_buf));
> > > > > >
> > > > > > Ditto.
> > > > > >
> > > > >
> > > > > I got it.
> > > > >
> > > > > > > +               memset((char *)buf->tuning_buf.va, 0, DIP_TUNING_SZ);
> > > > > >
> > > > > > Ditto.
> > > > >
> > > > > I got it.
> > > > >
> > > > > >
> > > > > > > +               /*
> > > > > > > +                * When user enqueued without tuning buffer,
> > > > > > > +                * it would use driver internal buffer.
> > > > > > > +                * So, tuning_data.va should be 0
> > > > > > > +                */
> > > > > > > +               dip_work->frameparams.tuning_data.va = 0;
> > > > > >
> > > > > > I don't understand this. We just zeroed the buffer via this kernel VA few
> > > > > > lines above, so why would it have to be set to 0?
> > > > > >
> > > > >
> > > > > I will remove this unnecessary line.
> > > > >
> > > > > > > +       }
> > > >
> > > > After confirming the firmware part, I found that we use this field
> > > > (tuning_data.va) to notify firmware if there is no tuning data from
> > > > user.
> > > >
> > > > - frameparams.tuning_data.va is 0: use the default tuning data in
> > > >                                    SCP, but we still need to pass
> > > >                                    frameparams.tuning_data.pa because
> > > >                                    the buffer contains some working
> > > >                                    buffer required.
> > > > - frameparams.tuning_data.va is not 0: the tuning data was passed from
> > > >                                        the user
> > > >
> > > > Since we should not pass cpu addres to SCP, could I rename tuning_data.va
> > > > as tuning_data.cookie, and write a constant value to indicate if SCP
> > > > should use its internal default setting or not here?
> > > >
> > > > For example,
> > > > /* SCP uses tuning data passed from userspace*/
> > > > dip_work->frameparams.tuning_data.cookie = MTK_DIP_USER_TUNING_DATA;
> > > >
> > > > /* SCP uses internal tuning data */
> > > > dip_work->frameparams.tuning_data.cookie = MTK_DIP_DEFAULT_TUNING_DATA;
> > >
> > > Perhaps we could just call it "present" and set to true or false?
> > >
> >
> > Yes. I would like to use "present" here.
> >
> > Original:
> >   struct img_addr {
> >       u64 va; /* Used by Linux OS access */
> >       u32 pa; /* Used by CM4 access */
> >       u32 iova; /* Used by IOMMU HW access */
> >   } __attribute__ ((__packed__));
> >
> >   struct img_ipi_frameparam {
> >       u32 index;
> >       u32 frame_no;
> >       u64 timestamp;
> >       u8 type;  /* enum mdp_stream_type */
> >       u8 state;
> >       u8 num_inputs;
> >       u8 num_outputs;
> >       u64 drv_data;
> >       struct img_input inputs[IMG_MAX_HW_INPUTS];
> >       struct img_output outputs[IMG_MAX_HW_OUTPUTS];
> >       struct img_addr tuning_data;
> >       struct img_addr subfrm_data;
> >       struct img_sw_addr config_data;
> >       struct img_sw_addr self_data;
> >   } __attribute__ ((__packed__));
> >
> >
> > Modified:
> >   struct tuning_buf {
> >       u8 present;
> 
> I'd make this u32 to keep the other fields aligned.
> 
> >       u32 pa;   /* Used by CM4 access */
> >       u32 iova; /* Used by IOMMU HW access */
> >   } __attribute__ ((__packed__));
> 

We will use u32 to keep the fields aligned in next patch.


> Best regards,
> Tomasz


Sincerely,

Frederic Chen




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux