Initial introduction of Lenovo Hr855xg2 family equipped with
Aspeed 2500 BMC SoC. Hr855xg2 is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Lenovo.
Specifically, This adds the Hr855xg2 platform device tree file
used by the Hr855xg2 BMC machines.
This also adds an entry of Hr855xg2 device tree file in Makefile
Signed-off-by: Andrew Peng <pengms1@xxxxxxxxxx>
Signed-off-by: Yonghui Liu <liuyh21@xxxxxxxxxx>
Signed-off-by: Lisa Liu <liuyj19@xxxxxxxxxx>
Signed-off-by: Harry Sung <hsung1@xxxxxxxxxx>
Signed-off-by: Derek Lin <dlin23@xxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts | 687 +++++++++++++++++++++++
2 files changed, 688 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914f..d874777 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1269,6 +1269,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
+ aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 0000000..d8dbf3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HR855XG2 BMC";
+ compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c14 = &i2c_riser1;
+ i2c15 = &i2c_riser2;
+ i2c16 = &i2c_riser3;
+ i2c17 = &i2c_M2;
+ i2c18 = &channel_0;
+ i2c19 = &channel_1;
+ i2c20 = &channel_2;
+ i2c21 = &channel_3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x00100000>; /* 1M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+ <&adc 12>,<&adc 13>,<&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default
+ &pinctrl_nrts2_default
+ &pinctrl_ndtr2_default
+ &pinctrl_ndsr2_default
+ &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default
+ &pinctrl_nri2_default>;
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&ibt {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc{
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&peci0 {
+ status = "okay";
+
+ peci-client@30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client@31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+
+ peci-client@32 {
+ compatible = "intel,peci-client";
+ reg = <0x32>;
+ };
+
+ peci-client@33 {
+ compatible = "intel,peci-client";
+ reg = <0x33>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_riser1: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_riser2: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_riser3: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_M2: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ bus-frequency = <90000>;
+ HotSwap@10 {
+ compatible = "adm1272";
+ reg = <0x10>;
+ };
+
+ VR@45 {
+ compatible = "pmbus";
+ reg = <0x45>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ /* temp1 */
+ tmp75@49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ /* temp2 */
+ tmp75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+
+ eeprom@54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@10 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@12 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@13 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan@14 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+
+ fan@15 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+
+ fan@16 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+};
+
+&gpio {
+
+ pin_gpio_a1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "BMC_EMMC_RST_N";
+ };
+
+ pin_gpio_a3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "PCH_PWROK_BMC_FPGA";
+ };
+
+ pin_gpio_b5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+ };
+
+ pin_gpio_b7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "CPU_SM_WP";
+ };
+
+ pin_gpio_e0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "PDB_PSU_SEL";
+ };
+
+ pin_gpio_e2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LOCATOR_LED_N";
+ };
+
+ pin_gpio_e5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_DBP_PRESENT_R1_N";
+ };
+
+ pin_gpio_e6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+ };
+
+ pin_gpio_f0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "IRQ_BMC_PCH_NMI_R";
+ };
+
+ pin_gpio_f1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU2_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_f2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RM_THROTTLE_EN_N";
+ };
+
+ pin_gpio_f3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FM_PMBUS_ALERT_B_EN";
+ };
+
+ pin_gpio_f4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_FORCE_NM_THROTTLE_N";
+ };
+
+ pin_gpio_f6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+ };
+
+ pin_gpio_g7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_PCIE_I2C_MUX_RST_N";
+ };
+
+ pin_gpio_h6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_DBP_PRESENT_R2_N";
+ };
+
+ pin_gpio_i3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SPI_BMC_BIOS_WP_N";
+ };
+
+ pin_gpio_j1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_USB_SEL";
+ };
+
+ pin_gpio_j2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PDB_SMB_RST_N";
+ };
+
+ pin_gpio_j3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SPI_BMC_BIOS_HOLD_N";
+ };
+
+ pin_gpio_l0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PDB_FAN_TACH_SEL";
+ };
+
+ pin_gpio_l1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SYS_RESET_BMC_FPGA_N";
+ };
+
+ pin_gpio_l4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_EFUSE_FAN_G1_EN";
+ };
+
+ pin_gpio_l5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_EFUSE_FAN_G2_EN";
+ };
+
+ pin_gpio_r6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU3_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_r7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU4_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_s1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "DBP_SYSPWROK_BMC";
+ };
+
+ pin_gpio_s2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCH_RST_RSMRST_N";
+ };
+
+ pin_gpio_s6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_HW_STRAP_5";
+ };
+
+ pin_gpio_z3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_PCH_SCI_LPC_N";
+ };
+
+ pin_gpio_aa0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FW_PSU_ALERT_EN_N";
+ };
+
+ pin_gpio_aa4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "DBP_CPU_PREQ_N";
+ };
+
+ pin_gpio_ab3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BMC_WDTRST";
+ };
+
+ pin_gpio_ac6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "ESPI_BMC_ALERT_N";
+ };
+
+};
--
2.7.4
