Re: [PATCH] csky: dts: Add NationalChip GX6605S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thx for the patch. No need seperate part into dtsi, just follow:
https://lore.kernel.org/linux-csky/1561376581-19568-1-git-send-email-guoren@xxxxxxxxxx/T/#u

On Tue, Jun 25, 2019 at 8:28 AM Andreas Färber <afaerber@xxxxxxx> wrote:
>
> Add Device Trees for NationalChip GX6605S SoC (based on CK610 CPU) and its
> dev board. GxLoader expects as filename gx6605s.dtb, so keep that.
> The bootargs are prepared to boot from USB and to output to serial.
>
> Compatibles for the SoC and board are left out for now.
>
> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> ---
>  arch/csky/boot/dts/gx6605s.dts  | 104 ++++++++++++++++++++++++++++++++++++++++
>  arch/csky/boot/dts/gx6605s.dtsi |  82 +++++++++++++++++++++++++++++++
>  2 files changed, 186 insertions(+)
>  create mode 100644 arch/csky/boot/dts/gx6605s.dts
>  create mode 100644 arch/csky/boot/dts/gx6605s.dtsi
>
> diff --git a/arch/csky/boot/dts/gx6605s.dts b/arch/csky/boot/dts/gx6605s.dts
> new file mode 100644
> index 000000000000..f7511024ec6f
> --- /dev/null
> +++ b/arch/csky/boot/dts/gx6605s.dts
> @@ -0,0 +1,104 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause */
> +/*
> + * GX6605S dev board
> + *
> + * Copyright (c) 2019 Andreas Färber
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "gx6605s.dtsi"
> +
> +/ {
> +       model = "Nationalchip GX6605S";
> +
> +       aliases {
> +               serial0 = &uart;
> +       };
> +
> +       chosen {
> +               bootargs = "console=ttyS0,115200n8 root=/dev/sda2 rw rootwait";
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       memory@10000000 {
> +               device_type = "memory";
> +               reg = <0x10000000 0x04000000>;
> +       };
> +
> +       dummy_apb_clk: dummy-apb-clk {
> +               compatible = "fixed-clock";
> +               clock-frequency = <24000000>; /* guesstimate */
> +               #clock-cells = <0>;
> +       };
> +
> +       buttons {
> +               compatible = "gpio-keys-polled";
> +               poll-interval = <100>;
> +               autorepeat;
> +
> +               button5 {
> +                       label = "button5";
> +                       linux,code = <103>;
> +                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               button6 {
> +                       label = "button6";
> +                       linux,code = <106>;
> +                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               button7 {
> +                       label = "button7";
> +                       linux,code = <28>;
> +                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               button8 {
> +                       label = "button8";
> +                       linux,code = <105>;
> +                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
> +               };
> +
> +               button9 {
> +                       label = "button9";
> +                       linux,code = <108>;
> +                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
> +               };
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led0 {
> +                       label = "led10";
> +                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "heartbeat";
> +               };
> +
> +               led1 {
> +                       label = "led11";
> +                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "timer";
> +               };
> +
> +               led2 {
> +                       label = "led12";
> +                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "default-on";
> +               };
> +
> +               led3 {
> +                       label = "led13";
> +                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
> +                       linux,default-trigger = "default-on";
> +               };
> +       };
> +};
> +
> +&timer0 {
> +               clocks = <&dummy_apb_clk>;
> +};
> diff --git a/arch/csky/boot/dts/gx6605s.dtsi b/arch/csky/boot/dts/gx6605s.dtsi
> new file mode 100644
> index 000000000000..956af5674add
> --- /dev/null
> +++ b/arch/csky/boot/dts/gx6605s.dtsi
> @@ -0,0 +1,82 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause */
> +/*
> + * NationalChip GX6605S SoC
> + *
> + * Copyright (c) 2019 Andreas Färber
> + */
> +
> +/ {
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +
> +       cpus {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               cpu0: cpu@0 {
> +                       device_type = "cpu";
> +                       compatible = "csky,ck610";
> +                       reg = <0>;
> +               };
> +       };
> +
> +       soc {
> +               compatible = "simple-bus";
> +               interrupt-parent = <&intc>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges;
> +
> +               timer0: timer@20a000 {
> +                       compatible = "csky,gx6605s-timer";
> +                       reg = <0x0020a000 0x400>;
> +                       clocks = <&dummy_apb_clk>;
> +                       interrupts = <10>;
> +               };
> +
> +               gpio: gpio@305000 {
> +                       compatible = "wd,mbl-gpio";
> +                       reg-names = "dirout", "dat", "set", "clr";
> +                       reg = <0x00305000 0x4>,
> +                             <0x00305004 0x4>,
> +                             <0x00305008 0x4>,
> +                             <0x0030500c 0x4>;
> +                       gpio-controller;
> +                       #gpio-cells = <2>;
> +               };
> +
> +               uart: serial@403000 {
> +                       compatible = "ns16550a";
> +                       reg = <0x00403000 0x400>;
> +                       interrupts = <15>;
> +                       clock-frequency = <29491200>;
> +                       reg-shift = <2>;
> +                       reg-io-width = <1>;
> +               };
> +
> +               intc: interrupt-controller@500000 {
> +                       compatible = "csky,gx6605s-intc";
> +                       reg = <0x00500000 0x400>;
> +                       interrupt-controller;
> +                       #interrupt-cells = <1>;
> +               };
> +
> +               ehci_hcd: usb@900000 {
> +                       compatible = "generic-ehci";
> +                       reg = <0x00900000 0x400>;
> +                       interrupts = <59>;
> +               };
> +
> +               ohci_hcd0: usb@a00000 {
> +                       compatible = "generic-ohci";
> +                       reg = <0x00a00000 0x400>;
> +                       interrupts = <58>;
> +               };
> +
> +               ohci_hcd1: usb@b00000 {
> +                       compatible = "generic-ohci";
> +                       reg = <0x00b00000 0x400>;
> +                       interrupts = <57>;
> +               };
> +       };
> +};
> --
> 2.16.4
>


-- 
Best Regards
 Guo Ren

ML: https://lore.kernel.org/linux-csky/




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux