[PATCH v13 11/13] MIPS: CI20: Reduce system timer and clocksource to 3 MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The default clock (48 MHz) is too fast for the system timer.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---

Notes:
    v5: New patch
    
    v6: Set also the rate for the clocksource channel's clock
    
    v7: No change
    
    v8: No change
    
    v9: Don't configure clock timer1, as the OS Timer is used as
    	clocksource on this SoC
    
    v10: Revert back to v8 bahaviour. Let the user choose what
    	 clocksource should be used.
    
    v11-v13: No change

 arch/mips/boot/dts/ingenic/ci20.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 4f7b1fa31cf5..2e9952311ecd 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -238,3 +239,9 @@
 		bias-disable;
 	};
 };
+
+&tcu {
+	/* 3 MHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <3000000>, <3000000>;
+};
-- 
2.21.0.593.g511ec345e18




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux