Hi, > Am 07.06.2019 um 13:11 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>: > > V3: > * add bindings documentation (suggested by sam@xxxxxxxxxxxx) > > V2 2019-06-05 07:07:05: > * fix typo in 99dtc panel compatible string (reported by imirkin@xxxxxxxxxxxx) > > V1 2019-06-04 14:53:00: > > Since v5.2-rc1 OMAP is no longer using a special display driver architecture > for DPI panels, but uses the general drm/panel/panel-simple. > > So we finally can add SoC independent panel definitions for two panel models > which we already had worked on quite a while ago (before device tree was > introduced): > > https://patchwork.kernel.org/patch/2851295/ > > > > H. Nikolaus Schaller (5): > drm/panel: simple: Add Sharp LQ070Y3DG3B panel support > drm/panel: simple: Add Ortustech COM37H3M panel support > dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel > dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel > dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel > > .../display/panel/ortustech,com37h3m05dtc.txt | 12 ++++ > .../display/panel/ortustech,com37h3m99dtc.txt | 12 ++++ > .../display/panel/sharp,lq070y3dg3b.txt | 12 ++++ > drivers/gpu/drm/panel/panel-simple.c | 63 +++++++++++++++++++ > 4 files changed, 99 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt > > -- > 2.19.1 > any progress towards merging this somewhere? It did not yet arrive in linux-next. BTW: should also be applied to 5.2 BR and thanks, Nikolaus
