Re: [PATCH v2 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 23, 2019 at 5:29 PM Shawn Guo <shawnguo@xxxxxxxxxx> wrote:
>
> On Mon, Jun 17, 2019 at 08:30:24AM -0700, Andrey Smirnov wrote:
> > Add support for ZII's i.MX7 based Remote Modem Unit 2 (RMU2) board.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> > Cc: Rob Herring <robh@xxxxxxxxxx>
> > Cc: Chris Healy <cphealy@xxxxxxxxx>
> > Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > Cc: Fabio Estevam <festevam@xxxxxxxxx>
> > Cc: Bob Langer <Bob.Langer@xxxxxxxx>
> > Cc: Liang Pan <Liang.Pan@xxxxxxxx>
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > ---
> >
> > Changes since [v1]:
> >
> >     - Added missing #address-cells and #size-cells
> >
> >     - Replaced reset-gpio -> reset-gpios
> >
> >
> > [v1] lore.kernel.org/r/20190614080317.16850-1-andrew.smirnov@xxxxxxxxx
> >
> >  arch/arm/boot/dts/Makefile           |   1 +
> >  arch/arm/boot/dts/imx7d-zii-rmu2.dts | 361 +++++++++++++++++++++++++++
> >  2 files changed, 362 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/imx7d-zii-rmu2.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 5559028b770e..516e2912236d 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -593,6 +593,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> >       imx7d-sdb.dtb \
> >       imx7d-sdb-reva.dtb \
> >       imx7d-sdb-sht11.dtb \
> > +     imx7d-zii-rmu2.dtb \
> >       imx7d-zii-rpu2.dtb \
> >       imx7s-colibri-eval-v3.dtb \
> >       imx7s-mba7.dtb \
> > diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> > new file mode 100644
> > index 000000000000..e60b3232a090
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
> > @@ -0,0 +1,361 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Device tree file for ZII's RMU2 board
> > + *
> > + * RMU - Remote Modem Unit
> > + *
> > + * Copyright (C) 2019 Zodiac Inflight Innovations
> > + */
> > +
> > +/dts-v1/;
> > +#include <dt-bindings/thermal/thermal.h>
> > +#include "imx7d.dtsi"
> > +
> > +/ {
> > +     model = "ZII RMU2 Board";
> > +     compatible = "zii,imx7d-rmu2", "fsl,imx7d";
> > +
> > +     chosen {
> > +             stdout-path = &uart2;
> > +     };
> > +
> > +     gpio-leds {
> > +             compatible = "gpio-leds";
> > +             pinctrl-0 = <&pinctrl_leds_debug>;
> > +             pinctrl-names = "default";
> > +
> > +             debug {
> > +                     label = "zii:green:debug1";
> > +                     gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> > +                     linux,default-trigger = "heartbeat";
> > +             };
> > +     };
> > +};
> > +
> > +&cpu0 {
> > +     arm-supply = <&sw1a_reg>;
> > +};
> > +
> > +&ecspi1 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_ecspi1>;
> > +     cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
> > +     status = "okay";
> > +
> > +     flash@0 {
> > +             compatible = "jedec,spi-nor";
> > +             spi-max-frequency = <20000000>;
> > +             reg = <0>;
> > +             #address-cells = <1>;
> > +             #size-cells = <1>;
> > +     };
> > +};
> > +
> > +&fec1 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_enet1>;
> > +     assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
> > +                       <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
> > +     assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
> > +     assigned-clock-rates = <0>, <100000000>;
> > +     phy-mode = "rgmii";
> > +     phy-handle = <&fec1_phy>;
> > +     status = "okay";
> > +
> > +     mdio {
> > +             #address-cells = <1>;
> > +             #size-cells = <0>;
> > +
> > +             fec1_phy: phy@0 {
>
> ethernet-phy for node name.
>

OK, will change.

> > +                     pinctrl-names = "default";
> > +                     pinctrl-0 = <&pinctrl_enet1_phy_reset>,
> > +                                 <&pinctrl_enet1_phy_interrupt>;
> > +                     reg = <0>;
> > +                     interrupt-parent = <&gpio1>;
> > +                     interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> > +                     reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
> > +             };
> > +     };
> > +};
> > +
> > +&i2c1 {
> > +     clock-frequency = <100000>;
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_i2c1>;
> > +     status = "okay";
> > +
> > +     pmic: pmic@8 {
>
> Label can be more specific, so maybe:
>
>         pfuze3000: pmic@8
>

Hmm, I don't think that label is used anywhere. I may as well just drop it.

> > +             compatible = "fsl,pfuze3000";
> > +             reg = <0x08>;
> > +
> > +             regulators {
> > +                     sw1a_reg: sw1a {
> > +                             regulator-min-microvolt = <700000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                             regulator-ramp-delay = <6250>;
> > +                     };
> > +
> > +                     sw1c_reg: sw1b {
> > +                             regulator-min-microvolt = <700000>;
> > +                             regulator-max-microvolt = <1475000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                             regulator-ramp-delay = <6250>;
> > +                     };
> > +
> > +                     sw2_reg: sw2 {
> > +                             regulator-min-microvolt = <1500000>;
> > +                             regulator-max-microvolt = <1850000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     sw3a_reg: sw3 {
> > +                             regulator-min-microvolt = <900000>;
> > +                             regulator-max-microvolt = <1650000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     swbst_reg: swbst {
> > +                             regulator-min-microvolt = <5000000>;
> > +                             regulator-max-microvolt = <5150000>;
> > +                     };
> > +
> > +                     snvs_reg: vsnvs {
> > +                             regulator-min-microvolt = <1000000>;
> > +                             regulator-max-microvolt = <3000000>;
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vref_reg: vrefddr {
> > +                             regulator-boot-on;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen1_reg: vldo1 {
> > +                             regulator-min-microvolt = <1800000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen2_reg: vldo2 {
> > +                             regulator-min-microvolt = <800000>;
> > +                             regulator-max-microvolt = <1550000>;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen3_reg: vccsd {
> > +                             regulator-min-microvolt = <2850000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen4_reg: v33 {
> > +                             regulator-min-microvolt = <2850000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen5_reg: vldo3 {
> > +                             regulator-min-microvolt = <1800000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-always-on;
> > +                     };
> > +
> > +                     vgen6_reg: vldo4 {
> > +                             regulator-min-microvolt = <1800000>;
> > +                             regulator-max-microvolt = <3300000>;
> > +                             regulator-always-on;
> > +                     };
> > +             };
> > +     };
> > +
> > +     eeprom@50 {
> > +             compatible = "atmel,24c04";
> > +             reg = <0x50>;
> > +     };
> > +
> > +     eeprom@52 {
> > +             compatible = "atmel,24c04";
> > +             reg = <0x52>;
> > +     };
> > +};
> > +
> > +&uart2 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_uart2>;
> > +     assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
> > +     assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> > +     status = "okay";
> > +};
> > +
> > +&uart4 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_uart4>;
> > +     assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
> > +     assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
> > +     status = "okay";
> > +
> > +     rave-sp {
> > +             compatible = "zii,rave-sp-rdu2";
> > +             current-speed = <1000000>;
> > +             #address-cells = <1>;
> > +             #size-cells = <1>;
> > +
> > +             watchdog {
> > +                     compatible = "zii,rave-sp-watchdog";
> > +             };
> > +
> > +             eeprom@a3 {
> > +                     compatible = "zii,rave-sp-eeprom";
> > +                     reg = <0xa3 0x4000>;
> > +                     #address-cells = <1>;
> > +                     #size-cells = <1>;
> > +                     zii,eeprom-name = "main-eeprom";
> > +             };
> > +     };
> > +};
> > +
> > +&usbotg2 {
> > +     dr_mode = "host";
> > +     disable-over-current;
> > +     status = "okay";
> > +};
> > +
> > +&usdhc1 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_usdhc1>;
> > +     bus-width = <4>;
> > +     no-1-8-v;
> > +     no-sdio;
> > +     keep-power-in-suspend;
> > +     status = "okay";
> > +};
> > +
> > +&usdhc3 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&pinctrl_usdhc3>;
> > +     bus-width = <8>;
> > +     no-1-8-v;
> > +     non-removable;
> > +     no-sdio;
> > +     no-sd;
> > +     keep-power-in-suspend;
> > +     status = "okay";
> > +};
> > +
> > +&wdog1 {
> > +     status = "disabled";
> > +};
> > +
> > +&snvs_rtc {
> > +     status = "disabled";
> > +};
>
> Please sort it alphabetically in label name.
>

Will do.

> > +
> > +&snvs_pwrkey {
> > +     status = "disabled";
> > +};
>
> We already queued up the patch below to disable snvs_pwrkey by default.
>
> https://lkml.org/lkml/2019/6/13/1170
>

OK, good to know, will drop.

> > +
> > +&iomuxc {
> > +     pinctrl_ecspi1: ecspi1grp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK       0x2
> > +                     MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI       0x2
> > +                     MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO       0x2
> > +                     MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
> > +             >;
> > +     };
> > +
> > +     pinctrl_enet1: enet1grp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_SD2_CD_B__ENET1_MDIO                           0x3
> > +                     MX7D_PAD_SD2_WP__ENET1_MDC                              0x3
> > +                     MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC               0x1
> > +                     MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0               0x1
> > +                     MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1               0x1
> > +                     MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2               0x1
> > +                     MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3               0x1
> > +                     MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL         0x1
> > +                     MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC               0x1
> > +                     MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0               0x1
> > +                     MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1               0x1
> > +                     MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2               0x1
> > +                     MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3               0x1
> > +                     MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL         0x1
> > +             >;
> > +     };
> > +
> > +     pinctrl_enet1_phy_reset: enet1phyresetgrp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_SD2_RESET_B__GPIO5_IO11        0x14
> > +
> > +             >;
> > +     };
> > +
> > +     pinctrl_i2c1: i2c1grp {
> > +             fsl,pins = <
> > +                     MX7D_PAD_I2C1_SDA__I2C1_SDA             0x4000007f
> > +                     MX7D_PAD_I2C1_SCL__I2C1_SCL             0x4000007f
> > +             >;
> > +     };
> > +
> > +     pinctrl_leds_debug: debuggrp {
>
> ledsgrp?
>

Sure, will change in next version.

Thanks,
Andrey Smirnov



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux