On Mon, Jun 24, 2019 at 10:29:27AM -0700, David Miller wrote: > From: megous@xxxxxxxxxx > Date: Thu, 20 Jun 2019 15:47:42 +0200 > > > From: Ondrej Jirman <megous@xxxxxxxxxx> > > > > This series implements support for Xunlong Orange Pi 3 board. > > > > - ethernet support (patches 1-3) > > - HDMI support (patches 4-6) > > > > For some people, ethernet doesn't work after reboot (but works on cold > > boot), when the stmmac driver is built into the kernel. It works when > > the driver is built as a module. It's either some timing issue, or power > > supply issue or a combination of both. Module build induces a power > > cycling of the phy. > > > > I encourage people with this issue, to build the driver into the kernel, > > and try to alter the reset timings for the phy in DTS or > > startup-delay-us and report the findings. > > This is a mixture of networking and non-networking changes so it really > can't go through my tree. > > I wonder how you expect this series to be merged? > > Thanks. This series was even longer before, with patches all around for various maintainers. I'd expect that relevant maintainers pick the range of patches meant for them. I don't know who's exactly responsible for what, but I think, this should work: - 2 stmmac patches should go together via some networking tree (is there something specific for stmmac?) - all DTS patches should go via sunxi - hdmi patches via some drm tree thank you and regards, o.
