At imx7ulp, the USB related analog register is located in PHY register
region too, so we need to control PLL at PHY driver directly.
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
drivers/usb/phy/phy-mxs-usb.c | 67 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 6fa16ab31e2e..70b8c8248caf 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -17,9 +17,11 @@
#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/iopoll.h>
#define DRIVER_NAME "mxs_phy"
+/* Register Macro */
#define HW_USBPHY_PWD 0x00
#define HW_USBPHY_TX 0x10
#define HW_USBPHY_CTRL 0x30
@@ -37,6 +39,11 @@
#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
+/* imx7ulp */
+#define HW_USBPHY_PLL_SIC 0xa0
+#define HW_USBPHY_PLL_SIC_SET 0xa4
+#define HW_USBPHY_PLL_SIC_CLR 0xa8
+
#define BM_USBPHY_CTRL_SFTRST BIT(31)
#define BM_USBPHY_CTRL_CLKGATE BIT(30)
#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
@@ -55,6 +62,12 @@
#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
+/* imx7ulp */
+#define BM_USBPHY_PLL_LOCK BIT(31)
+#define BM_USBPHY_PLL_REG_ENABLE BIT(21)
+#define BM_USBPHY_PLL_BYPASS BIT(16)
+#define BM_USBPHY_PLL_POWER BIT(12)
+#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6)
/* Anatop Registers */
#define ANADIG_ANA_MISC0 0x150
@@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = {
.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
};
+static const struct mxs_phy_data imx7ulp_phy_data = {
+};
+
static const struct of_device_id mxs_phy_dt_ids[] = {
{ .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
@@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = {
{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
{ .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
+ { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
@@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
return mxs_phy->data == &imx6sl_phy_data;
}
+static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
+{
+ return mxs_phy->data == &imx7ulp_phy_data;
+}
+
/*
* PHY needs some 32K cycles to switch from 32K clock to
* bus (such as AHB/AXI, etc) clock.
@@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
}
}
+static int mxs_phy_pll_enable(void __iomem *base, bool enable)
+{
+ int ret = 0;
+
+ if (enable) {
+ u32 value;
+
+ writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
+ writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
+ writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
+ ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
+ value, (value & BM_USBPHY_PLL_LOCK) != 0,
+ 100, 10000);
+ if (ret)
+ return ret;
+
+ writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+ HW_USBPHY_PLL_SIC_SET);
+ } else {
+ writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
+ HW_USBPHY_PLL_SIC_CLR);
+ writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
+ writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
+ writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
+ }
+
+ return ret;
+}
+
static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
{
int ret;
void __iomem *base = mxs_phy->phy.io_priv;
+ if (is_imx7ulp_phy(mxs_phy)) {
+ ret = mxs_phy_pll_enable(base, true);
+ if (ret)
+ return ret;
+ }
+
ret = stmp_reset_block(base + HW_USBPHY_CTRL);
if (ret)
- return ret;
+ goto disable_pll;
/* Power up the PHY */
writel(0, base + HW_USBPHY_PWD);
@@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
mxs_phy_tx_init(mxs_phy);
return 0;
+
+disable_pll:
+ if (is_imx7ulp_phy(mxs_phy))
+ mxs_phy_pll_enable(base, false);
+ return ret;
}
/* Return true if the vbus is there */
@@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy)
writel(BM_USBPHY_CTRL_CLKGATE,
phy->io_priv + HW_USBPHY_CTRL_SET);
+ if (is_imx7ulp_phy(mxs_phy))
+ mxs_phy_pll_enable(phy->io_priv, false);
+
clk_disable_unprepare(mxs_phy->clk);
}
--
2.14.1
