Hi Katsuhiro,
Am Samstag, 22. Juni 2019, 16:50:10 CEST schrieb Katsuhiro Suzuki:
> Current linux-next on my environment, 'ifconfig eth0 up' does not
> work correctly with following message...
>
> -----
> root@linaro-alip:~# ifconfig eth0 up
> [ 105.028916] rk_gmac-dwmac ff290000.ethernet eth0: stmmac_open: Cannot
> attach to PHY (error: -19)
> SIOCSIFFLAGS: No such device
> -----
>
> I checked drivers/net/ethernet/stmicro/stmmac/stmmac_main.c and found
> stmmac_init_phy() is going to fail if ethernet device node does not
> have following property:
> - phy-handle
> - phy
> - phy-device
>
> I salvaged old version of linux-next kernel (5.2.0-rc1-20190523),
> network device of my Tinker Board worked correctly if use it.
>
> I have not bisect commit of root cause yet... Is it better to bisect
> and find problem instead of sending this patch?
That is clearly a regression (even recent) a newer kernel should
not break old devicetrees and the mdio subnode creating a
mdio bus is already marked as optional.
So this will likely affect a lot more boards than the tinker board.
So if you can find the time you could try to find the offending
commit first, so that ideally the network maintainers can fix that
up.
Thanks
Heiko
> On 2019/06/22 17:33, Heiko Stuebner wrote:
> > Hi,
> >
> > Am Freitag, 21. Juni 2019, 20:00:17 CEST schrieb Katsuhiro Suzuki:
> >> This patch adds missing mdio and ethernet PHY nodes for rk3328 ASUS
> >> tinker board.
> >>
> >> Signed-off-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
> >
> > just for my understanding, which problem does this solve?
> > Normally the gmac can establish connections just fine on
> > the rk3288 by probing the phy in the automatic way.
> >
> > And I also don't see any additional properties like phy
> > interrupt line below.
> >
> >
> > Thanks
> > Heiko
> >
> >> ---
> >> arch/arm/boot/dts/rk3288-tinker.dtsi | 12 ++++++++++++
> >> 1 file changed, 12 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
> >> index 293576869546..3190817e8d5d 100644
> >> --- a/arch/arm/boot/dts/rk3288-tinker.dtsi
> >> +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
> >> @@ -117,6 +117,7 @@
> >> assigned-clocks = <&cru SCLK_MAC>;
> >> assigned-clock-parents = <&ext_gmac>;
> >> clock_in_out = "input";
> >> + phy-handle = <&phy0>;
> >> phy-mode = "rgmii";
> >> phy-supply = <&vcc33_lan>;
> >> pinctrl-names = "default";
> >> @@ -127,6 +128,17 @@
> >> tx_delay = <0x30>;
> >> rx_delay = <0x10>;
> >> status = "ok";
> >> +
> >> + mdio0 {
> >> + compatible = "snps,dwmac-mdio";
> >> + #address-cells = <1>;
> >> + #size-cells = <0>;
> >> +
> >> + phy0: ethernet-phy@0 {
> >> + compatible = "ethernet-phy-ieee802.3-c22";
> >> + reg = <0>;
> >> + };
> >> + };
> >> };
> >>
> >> &gpu {
> >>
> >
> >
> >
> >
> >
>
>
