On Wed, 19 Jun 2019 14:29:54 +0200
Fabrice Gasnier <fabrice.gasnier@xxxxxx> wrote:
> Add missing vdda-supply, analog power supply, to STM32 ADC. It's required
> to properly supply the ADC.
>
> Fixes: 841fcea454fe ("Documentation: dt-bindings: Document STM32 ADC DT
> bindings")
>
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to ignore completely.
thanks,
Jonathan
> ---
> Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> index 8346bcb..93a0bd2 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt
> @@ -38,6 +38,7 @@ Required properties:
> It's required on stm32h7.
> - clock-names: Must be "adc" and/or "bus" depending on part used.
> - interrupt-controller: Identifies the controller node as interrupt-parent
> +- vdda-supply: Phandle to the vdda input analog voltage.
> - vref-supply: Phandle to the vref input analog reference voltage.
> - #interrupt-cells = <1>;
> - #address-cells = <1>;
