Hi Robert, On Thu, Jun 20, 2019 at 10:32 AM Robert Chiras <robert.chiras@xxxxxxx> wrote: > > Add dt-bindings documentation for Raydium RM67191 DSI panel. > > Signed-off-by: Robert Chiras <robert.chiras@xxxxxxx> > Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > --- > .../bindings/display/panel/raydium,rm67191.txt | 39 ++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > new file mode 100644 > index 0000000..52af272 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt > @@ -0,0 +1,39 @@ > +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol > + > +Required properties: > +- compatible: "raydium,rm67191" > +- reg: virtual channel for MIPI-DSI protocol > + must be <0> > +- dsi-lanes: number of DSI lanes to be used > + must be <3> or <4> > +- port: input port node with endpoint definition as > + defined in Documentation/devicetree/bindings/graph.txt; > + the input port should be connected to a MIPI-DSI device > + driver > + > +Optional properties: > +- reset-gpios: a GPIO spec for the RST_B GPIO pin > +- width-mm: see panel-common.txt > +- height-mm: see panel-common.txt > +- video-mode: 0 - burst-mode > + 1 - non-burst with sync event > + 2 - non-burst with sync po ulse No power-supply property?
