Re: [PATCH v5 00/15] add ecspi ERR009165 for i.mx6/7 soc family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Shawn/Will,
  Do you have comments for this V5 patch set? I got tags from Mark,
Vinod and Rob.

On 2019-06-10 at 08:17 +0000, yibin.gong@xxxxxxx wrote:
> From: Robin Gong <yibin.gong@xxxxxxx>
> 
>   There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
> transfer to be send twice in DMA mode. Please get more information
> from:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww
> .nxp.com%2Fdocs%2Fen%2Ferrata%2FIMX6DQCE.pdf&amp;data=02%7C01%7Cyibin
> .gong%40nxp.com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6f
> a92cd99c5c301635%7C0%7C1%7C636957513814970412&amp;sdata=%2F9sbrDEmIpu
> OazcIAVpIrELZMEjO94%2Bjen7wOOlVsVk%3D&amp;reserved=0. The workaround
> is adding
> new sdma ram script which works in XCH  mode as PIO inside sdma
> instead
> of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should
> be
> exist on all legacy i.mx6/7 soc family before i.mx6ul.
>   NXP fix this design issue from i.mx6ul, so newer chips including
> i.mx6ul/
> 6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8
> chips
> still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
> for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need
> errata
> or not.
>   The first two reverted patches should be the same issue, though, it
> seems 'fixed' by changing to other shp script. Hope Sean or Sascha
> could
> have the chance to test this patch set if could fix their issues.
>   Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not
> work
> on i.mx8mm because the event id is zero.
> 
> PS:
>    Please get sdma firmware from below linux-firmware and copy it to
> your
> local rootfs /lib/firmware/imx/sdma.
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgit
> .kernel.org%2Fpub%2Fscm%2Flinux%2Fkernel%2Fgit%2Ffirmware%2Flinux-
> firmware.git%2Ftree%2Fimx%2Fsdma&amp;data=02%7C01%7Cyibin.gong%40nxp.
> com%7C67d3e78fe5ef4428b3af08d6ed7beb74%7C686ea1d3bc2b4c6fa92cd99c5c30
> 1635%7C0%7C1%7C636957513814970412&amp;sdata=xXHBWpSaSLmMosb%2FajOAiXn
> nkxaYV6HCt25OOzgRLbI%3D&amp;reserved=0
> 
> v2:
>   1.Add commit log for reverted patches.
>   2.Add comment for 'ecspi_fixed' in sdma driver.
>   3.Add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
>     rather than remove.
> v3:
>   1.Confirm with design team make sure ERR009165 fixed on
> i.mx6ul/i.mx6ull
>     /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy
> chips.
>     Correct dts related dts patch in v2.
>   2.Clean eratta information in binding doc and new 'tx_glitch_fixed'
> flag
>     in spi-imx driver to state ERR009165 fixed or not.
>   3.Enlarge burst size to fifo size for tx since tx_wml set to 0 in
> the
>     errata workaroud, thus improve performance as possible.
> v4:
>   1.add Ack tag from Mark and Vinod
>   2. remove checking 'event_id1' zero as 'event_id0'.
> v5:
>   1.Add another patch for compatible with the current uart driver
> which
>     using rom script, so both uart ram script and rom script
> supported
>     in latest firmware, by default uart rom script used. UART driver
>     will be broken without this patch. Latest sdma firmware has been
>     already updated in linux-firmware. 
> 
> Robin Gong (15):
>   Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
>   Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
>   Revert "dmaengine: imx-sdma: refine to load context only once"
>   dmaengine: imx-sdma: remove dupilicated sdma_load_context
>   dmaengine: imx-sdma: add mcu_2_ecspi script
>   spi: imx: fix ERR009165
>   spi: imx: remove ERR009165 workaround on i.mx6ul
>   spi: imx: add new i.mx6ul compatible name in binding doc
>   dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
>   dma: imx-sdma: add i.mx6ul/6sx compatible name
>   dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
>   ARM: dts: imx6ul: add dma support on ecspi
>   ARM: dts: imx6sll: correct sdma compatible
>   arm64: defconfig: Enable SDMA on i.mx8mq/8mm
>   dmaengine: imx-sdma: add uart rom script
> 
>  .../devicetree/bindings/dma/fsl-imx-sdma.txt       |  2 +
>  .../devicetree/bindings/spi/fsl-imx-cspi.txt       |  1 +
>  arch/arm/boot/dts/imx6q.dtsi                       |  2 +-
>  arch/arm/boot/dts/imx6qdl.dtsi                     |  8 +-
>  arch/arm/boot/dts/imx6sll.dtsi                     |  2 +-
>  arch/arm/boot/dts/imx6ul.dtsi                      |  8 ++
>  arch/arm64/configs/defconfig                       |  3 +
>  drivers/dma/imx-sdma.c                             | 88
> ++++++++++++++++------
>  drivers/spi/spi-imx.c                              | 61
> ++++++++++++---
>  include/linux/platform_data/dma-imx-sdma.h         | 11 ++-
>  10 files changed, 145 insertions(+), 41 deletions(-)
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux