Hi Luca,
On Fri, Jun 21, 2019 at 12:58:24AM +0200, Luca Weiss wrote:
> This enables userspace to signal the bootloader to go into the
> bootloader or recovery mode.
>
> The magic values can be found in both the downstream kernel and the LK
> kernel (bootloader).
>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> Sidenote: Why are there no userspace tools to be found that support
> this? Anyways, we have one now in postmarketOS :)
>
> arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> index 643c57f84818..f86736a6d77e 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
> @@ -338,6 +338,20 @@
> };
> };
> };
> +
> + imem@fe805000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0xfe805000 0x1000>;
> +
> + reboot-mode {
> + compatible = "syscon-reboot-mode";
> + offset = <0x65c>;
> +
> + mode-normal = <0x77665501>;
> + mode-bootloader = <0x77665500>;
> + mode-recovery = <0x77665502>;
> + };
> + };
> };
I think that it makes sense to put this snippet in qcom-msm8974.dtsi
with a status of disabled, and then enable it in
qcom-msm8974-fairphone-fp2.dts like so:
imem@fe805000 {
status = "ok";
};
What's the pmOS utility that utilizes this? I'll test it on the Nexus 5.
Thanks,
Brian
