On Thu, Jun 20, 2019 at 11:13 AM Andre Przywara <andre.przywara@xxxxxxx> wrote: > > On Thu, 20 Jun 2019 10:22:41 +0100 > Sudeep Holla <sudeep.holla@xxxxxxx> wrote: > > > On Mon, Jun 03, 2019 at 04:30:04PM +0800, peng.fan@xxxxxxx wrote: > > > From: Peng Fan <peng.fan@xxxxxxx> > > > > > > The ARM SMC mailbox binding describes a firmware interface to trigger > > > actions in software layers running in the EL2 or EL3 exception levels. > > > The term "ARM" here relates to the SMC instruction as part of the ARM > > > instruction set, not as a standard endorsed by ARM Ltd. > > > > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > > > --- > > > > > > V2: > > > Introduce interrupts as a property. > > > > > > V1: > > > arm,func-ids is still kept as an optional property, because there is no > > > defined SMC funciton id passed from SCMI. So in my test, I still use > > > arm,func-ids for ARM SIP service. > > > > > > .../devicetree/bindings/mailbox/arm-smc.txt | 101 +++++++++++++++++++++ > > > 1 file changed, 101 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/mailbox/arm-smc.txt > > > > > > diff --git a/Documentation/devicetree/bindings/mailbox/arm-smc.txt b/Documentation/devicetree/bindings/mailbox/arm-smc.txt > > > new file mode 100644 > > > index 000000000000..401887118c09 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/mailbox/arm-smc.txt > > > @@ -0,0 +1,101 @@ > > > +ARM SMC Mailbox Interface > > > +========================= > > > + > > > +This mailbox uses the ARM smc (secure monitor call) instruction to trigger > > > +a mailbox-connected activity in firmware, executing on the very same core > > > +as the caller. By nature this operation is synchronous and this mailbox > > > +provides no way for asynchronous messages to be delivered the other way > > > +round, from firmware to the OS, but asynchronous notification could also > > > +be supported. However the value of r0/w0/x0 the firmware returns after > > > +the smc call is delivered as a received message to the mailbox framework, > > > +so a synchronous communication can be established, for a asynchronous > > > +notification, no value will be returned. The exact meaning of both the > > > +action the mailbox triggers as well as the return value is defined by > > > +their users and is not subject to this binding. > > > + > > > +One use case of this mailbox is the SCMI interface, which uses shared memory > > > +to transfer commands and parameters, and a mailbox to trigger a function > > > +call. This allows SoCs without a separate management processor (or when > > > +such a processor is not available or used) to use this standardized > > > +interface anyway. > > > + > > > +This binding describes no hardware, but establishes a firmware interface. > > > +Upon receiving an SMC using one of the described SMC function identifiers, > > > +the firmware is expected to trigger some mailbox connected functionality. > > > +The communication follows the ARM SMC calling convention[1]. > > > +Firmware expects an SMC function identifier in r0 or w0. The supported > > > +identifiers are passed from consumers, or listed in the the arm,func-ids > > > +properties as described below. The firmware can return one value in > > > +the first SMC result register, it is expected to be an error value, > > > +which shall be propagated to the mailbox client. > > > + > > > +Any core which supports the SMC or HVC instruction can be used, as long as > > > +a firmware component running in EL3 or EL2 is handling these calls. > > > + > > > +Mailbox Device Node: > > > +==================== > > > + > > > +This node is expected to be a child of the /firmware node. > > > + > > > +Required properties: > > > +-------------------- > > > +- compatible: Shall be "arm,smc-mbox" > > > +- #mbox-cells Shall be 1 - the index of the channel needed. > > > +- arm,num-chans The number of channels supported. > > > +- method: A string, either: > > > + "hvc": if the driver shall use an HVC call, or > > > + "smc": if the driver shall use an SMC call. > > > + > > > +Optional properties: > > > +- arm,func-ids An array of 32-bit values specifying the function > > > + IDs used by each mailbox channel. Those function IDs > > > + follow the ARM SMC calling convention standard [1]. > > > + There is one identifier per channel and the number > > > + of supported channels is determined by the length > > > + of this array. > > > +- interrupts SPI interrupts may be listed for notification, > > > + each channel should use a dedicated interrupt > > > + line. > > > + > > > > I think SMC mailbox as mostly unidirectional/Tx only channel. And the > > interrupts here as stated are for notifications, so I prefer to keep > > them separate channel. I assume SMC call return indicates completion. > > Or do you plan to use these interrupts as the indication for completion > > of the command? I see in patch 2/2 the absence of IRQ is anyway dealt > > the way I mention above. > > > > Does it make sense or am I missing something here ? > > I think you are right. From a mailbox point of view "completion" means > that the trigger has reached the other side. A returning smc call is a > perfect indication of this fact. > Yes. mailbox only cares about message delivery. > Whether the action triggered by this > mailbox command has completed is a totally separate question and out of > the scope of the mailbox. > Yes, whether the message is accepted/rejected at protocol level is a matter of upper layer (protocol). > This should be handled by a higher level > protocol (SCPI in this case). Which could mean that this employs a > separate return mailbox channel, which is RX only and implemented by > interrupts. Which could or could not be part of this driver. > Any message received over the same class of channel should be handled in this driver. Cheers
