Re: [PATCH V6 06/27] PCI: tegra: Add PCIe Gen2 link speed support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 20, 2019 at 08:27:15PM +0530, Manikanta Maddireddy wrote:
> 
> 
> On 20-Jun-19 8:02 PM, Lorenzo Pieralisi wrote:
> > On Tue, Jun 18, 2019 at 11:31:45PM +0530, Manikanta Maddireddy wrote:
> >> Tegra124, Tegra132, Tegra210 and Tegra186 support Gen2 link speed. After
> >> PCIe link is up in Gen1, set target link speed as Gen2 and retrain link.
> >> Link switches to Gen2 speed if Gen2 capable end point is connected, else
> >> link stays in Gen1.
> >>
> >> Per PCIe 4.0r0.9 sec 7.6.3.7 implementation note, driver need to wait for
> >> PCIe LTSSM to come back from recovery before retraining the link.
> >>
> >> Signed-off-by: Manikanta Maddireddy <mmaddireddy@xxxxxxxxxx>
> >> Acked-by: Thierry Reding <treding@xxxxxxxxxx>
> >> ---
> >> V6: No change
> >>
> >> V5: No change
> >>
> >> V4: No change
> >>
> >> V3: Added blank line after each while loop.
> >>
> >> V2: Changed "for loop" to "while", to make it compact and handled coding
> >> style comments.
> >>
> >>  drivers/pci/controller/pci-tegra.c | 64 ++++++++++++++++++++++++++++++
> >>  1 file changed, 64 insertions(+)
> >>
> >> diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
> >> index 5e9fcef5f8eb..5d19067f7193 100644
> >> --- a/drivers/pci/controller/pci-tegra.c
> >> +++ b/drivers/pci/controller/pci-tegra.c
> >> @@ -191,6 +191,8 @@
> >>  #define  RP_LINK_CONTROL_STATUS_DL_LINK_ACTIVE	0x20000000
> >>  #define  RP_LINK_CONTROL_STATUS_LINKSTAT_MASK	0x3fff0000
> >>  
> >> +#define RP_LINK_CONTROL_STATUS_2		0x000000b0
> >> +
> >>  #define PADS_CTL_SEL		0x0000009c
> >>  
> >>  #define PADS_CTL		0x000000a0
> >> @@ -226,6 +228,7 @@
> >>  #define PADS_REFCLK_CFG_DRVI_SHIFT		12 /* 15:12 */
> >>  
> >>  #define PME_ACK_TIMEOUT 10000
> >> +#define LINK_RETRAIN_TIMEOUT 100000 /* in usec */
> >>  
> >>  struct tegra_msi {
> >>  	struct msi_controller chip;
> >> @@ -2089,6 +2092,64 @@ static bool tegra_pcie_port_check_link(struct tegra_pcie_port *port)
> >>  	return false;
> >>  }
> >>  
> >> +static void tegra_pcie_change_link_speed(struct tegra_pcie *pcie)
> >> +{
> >> +	struct device *dev = pcie->dev;
> >> +	struct tegra_pcie_port *port, *tmp;
> >> +	ktime_t deadline;
> >> +	u32 value;
> >> +
> >> +	list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
> > And the reason to use the _safe version is ?
> >
> > Lorenzo
> 
> This function is called in probe and resume_noirq. list entry is deleted in
> remove, I don't see any scenario where it can cause a race condition.
> It is fine to drop _safe. I will fix it in next version.

I will do it myself, it is not a fundamental issue, do not send another
version.

Thanks,
Lorenzo



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux