Re: [PATCH v2 00/17] net: introduce Qualcomm IPA driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 18, 2019 at 10:15 PM Johannes Berg
<johannes@xxxxxxxxxxxxxxxx> wrote:
> On Tue, 2019-06-18 at 22:09 +0200, Arnd Bergmann wrote:
> > > One is the whole multi-function device, where a single WWAN device is
> > > composed of channels offered by actually different drivers, e.g. for a
> > > typical USB device you might have something like cdc_ether and the
> > > usb_wwan TTY driver. In this way, we need to "compose" the WWAN device
> > > similarly, e.g. by using the underlying USB device "struct device"
> > > pointer to tie it together.
> > >
> > > The other is something like IPA or the Intel modem driver, where the
> > > device is actually a single (e.g. PCIe) device and just has a single
> > > driver, but that single driver offers different channels.
> >
> > I would hope we can simplify this to expect only the second model,
> > where you have a 'struct device' corresponding to hardware and the
> > driver for it creates one wwan_device that user space talks to.
>
> I'm not sure.
>
> Fundamentally, we have drivers in Linux for the ethernet part, for the
> TTY part, and for whatever other part might be in a given USB multi-
> function device.
>
> > Clearly the multi-function device hardware has to be handled somehow,
> > but it would seem much cleaner in the long run to do that using
> > a special workaround rather than putting this into the core interface.
>
> I don't think it really makes the core interface much more complex or
> difficult though, and it feels easier than writing a completely
> different USB driver yet again for all these devices?
>
> As far as I understand from Dan, sometimes they really are no different
> from a generic USB TTY and a generic USB ethernet, except you know that
> if those show up together it's a modem.
>
> > E.g. have a driver that lets you create a wwan_device by passing
> > netdev and a tty chardev into a configuration interface, and from that
> > point on use the generic wwan abstraction.
>
> Yeah, but where do you hang that driver? Maybe the TTY function is
> actually a WWAN specific USB driver, but the ethernet is something
> generic that can also work with pure ethernet USB devices, and it's
> difficult to figure out how to tie those together. The modules could
> load in completely different order, or even the ethernet module could
> load but the TTY one doesn't because it's not configured, or vice versa.

That was more or less my point: The current drivers exist, but don't
lean themselves to fitting into a new framework, so maybe the best
answer is not to try fitting them.

To clarify: I'm not suggesting to write new USB drivers for these at all,
but instead keep three parts that are completely unaware of each other
a)  a regular netdevice driver
b)  a regular tty driver
c)  the new wwan subsystem that expects a device to be created
    from a hardware driver but knows nothing of a) and b)

To connect these together, we need one glue driver that implements
the wwan_device and talks to a) and b) as the hardware. There are
many ways to do that. One way would be to add a tty ldisc driver.
A small user space helper opens the chardev, sets the ldisc
and then uses an ldisc specific ioctl command to create a wwan
device by passing an identifier of the netdevice and then exits.
>From that point on, you have a wwan device like any other.

       Arnd



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux