Re: [PATCH] arm64: dts: renesas: hihope-common: Add LEDs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Fabrizio,

On Fri, Jun 14, 2019 at 3:17 PM Fabrizio Castro
<fabrizio.castro@xxxxxxxxxxxxxx> wrote:
> This patch adds LEDs support to the HiHope RZ/G2[MN] Main Board
> common device tree.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
> @@ -17,6 +17,30 @@
>                 stdout-path = "serial0:115200n8";
>         };
>
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led0 {
> +                       gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
> +                       label = "LED0";

There's no need for a label property, if it matches the node name
(applies to all four LEDs).

Note that this GPIO is shared with a switch, like on Salvator-X(S) and
ULCB.  As currently Linux cannot handle both, describing the LED
precludes adding the switch later.
(applies to the first 3 LEDs).

> +               led3 {
> +                       gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
> +                       label = "LED3";
> +               };

I cannot find LED3. According to the schematics GP0_0 == CS0n is used
as the chipselect for the LVDS switch?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux