[PATCH 01/10] dt-bindings: crypto: k3: Add sa2ul bindings documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.

The Security Accelerator (SA2_UL) subsystem provides hardware
cryptographic acceleration for the following use cases:
• Encryption and authentication for secure boot
• Encryption and authentication of content in applications
  requiring DRM (digital rights management) and
  content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0

SA2UL needs on tx channel and a pair of rx dma channels.

Signed-off-by: Keerthy <j-keerthy@xxxxxx>
---
 .../devicetree/bindings/crypto/sa2ul.txt      | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/sa2ul.txt

diff --git a/Documentation/devicetree/bindings/crypto/sa2ul.txt b/Documentation/devicetree/bindings/crypto/sa2ul.txt
new file mode 100644
index 000000000000..81cc039673b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/sa2ul.txt
@@ -0,0 +1,47 @@
+K3 SoC SA2UL crypto module
+
+Required properties:
+
+- compatible : Should be:
+  - "ti,sa2ul-crypto"
+- reg : Offset and length of the register set for the module
+
+- dmas: DMA specifiers for tx and rx dma. sa2ul needs one tx channel
+	and 2 rx channels. First rx channel for < 256 bytes and
+	the other one for >=256 bytes. See the DMA client binding,
+        Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names has to have one tx and 2 rx names
+	corresponding to dmas abive.
+- ti,psil-config* - UDMA PSIL native Peripheral using packet mode.
+	SA2UL must have EPIB(Extended protocal information block)
+	and PSDATA(protocol specific data) properties.
+
+Example AM654 SA2UL:
+crypto: crypto@4E00000 {
+	compatible = "ti,sa2ul-crypto";
+	reg = <0x0 0x4E00000 0x0 0x1200>;
+	ti,psil-base = <0x4000>;
+
+	dmas = <&main_udmap &crypto 0 UDMA_DIR_TX>,
+		<&main_udmap &crypto 0 UDMA_DIR_RX>,
+		<&main_udmap &crypto 1 UDMA_DIR_RX>;
+	dma-names = "tx", "rx1", "rx2";
+
+	ti,psil-config0 {
+		linux,udma-mode = <UDMA_PKT_MODE>;
+		ti,needs-epib;
+		ti,psd-size = <64>;
+	};
+
+	ti,psil-config1 {
+		linux,udma-mode = <UDMA_PKT_MODE>;
+		ti,needs-epib;
+		ti,psd-size = <64>;
+	};
+
+	ti,psil-config2 {
+		linux,udma-mode = <UDMA_PKT_MODE>;
+		ti,needs-epib;
+		ti,psd-size = <64>;
+	};
+};
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux