On Fri, Jun 14, 2019 at 2:31 PM Joseph Kogut <joseph.kogut@xxxxxxxxx> wrote:
>
> Add device tree node for mali gpu on Odroid XU3 SoCs.
>
> Signed-off-by: Joseph Kogut <joseph.kogut@xxxxxxxxx>
> ---
> .../boot/dts/exynos5422-odroidxu3-common.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 93a48f2dda49..1f2ae19d01af 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -48,6 +48,24 @@
> cooling-levels = <0 130 170 230>;
> };
>
> + gpu: gpu@11800000 {
> + compatible = "samsung,exynos-mali", "arm,mali-t628";
> + reg = <0x11800000 0x5000>;
> + interrupts = <0 117 0>,
> + <0 219 0>,
> + <0 74 0>;
> + interrupt-names = "gpu", "job", "mmu";
Please use the order defined in the binding doc.
> + clocks = <&clock CLK_G3D>,
> + <&clock CLK_DOUT_ACLK_G3D>,
> + <&clock CLK_FOUT_VPLL>;
The binding doc says a single clock.
> + mali-supply = <&buck4_reg>;
> + operating-points = <
The binding doc says operating-points-v2.
> + /* KHz uV */
> + 600000 1150000
> + 177000 812500
> + >;
> + };
> +
> thermal-zones {
> cpu0_thermal: cpu0-thermal {
> thermal-sensors = <&tmu_cpu0 0>;
> --
> 2.22.0
>
