From: Anson Huang <Anson.Huang@xxxxxxx>
The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.
Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 4 ++++
arch/arm/boot/dts/imx6ul.dtsi | 1 +
2 files changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 9207d5d..cbe61b6 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -238,6 +238,10 @@
status = "okay";
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index fc388b8..0c51439 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -650,6 +650,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
--
2.7.4
