[PATCH] arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



As per binding documentation [1], the DWC3 core should have the "ref",
"bus_early" and "suspend" clocks. As explained in the binding, those
clocks are required for new platforms but not for existing platforms
before commit fe8abf332b8f ("usb: dwc3: support clocks and resets for
DWC3 core").

However, as those clocks are really treated as required, this ends with
having some annoying messages when the "rockchip,rk3399-dwc3" is used:

[    1.724107] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    1.731893] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[    2.495937] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[    2.647239] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2

In order to remove those annoying messages, update the DWC3 hardware
module node and add all the required clocks. With this change, both, the
glue node and the DWC3 core node, have the clocks defined, but that's
not really a problem and there isn't a side effect on do this. So, we
can get rid of the annoying get clk error messages.

[1] Documentation/devicetree/bindings/usb/dwc3.txt

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 196ac9b78076..a15348d185ce 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -414,6 +414,9 @@
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+				 <&cru SCLK_USB3OTG0_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
 			dr_mode = "otg";
 			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
 			phy-names = "usb2-phy", "usb3-phy";
@@ -447,6 +450,9 @@
 			compatible = "snps,dwc3";
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+				 <&cru SCLK_USB3OTG1_SUSPEND>;
+			clock-names = "ref", "bus_early", "suspend";
 			dr_mode = "otg";
 			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
 			phy-names = "usb2-phy", "usb3-phy";
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux