Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. This patch-set is to convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. However the interrupts could only be handled by MC which fires MSIs to ARM cores. So the interrupt enabling and handling still rely on MC APIs. MC APIs for interrupt and PPS event support are also added by this patch-set. Yangbo Lu (6): ptp: add QorIQ PTP support for DPAA2 dpaa2-ptp: reuse ptp_qoriq driver dt-binding: ptp_qoriq: support DPAA2 PTP compatible arm64: dts: fsl: add ptp timer node for dpaa2 platforms dpaa2-ptp: add interrupt support MAINTAINERS: maintain DPAA2 PTP driver in QorIQ PTP entry .../devicetree/bindings/ptp/ptp-qoriq.txt | 3 +- MAINTAINERS | 9 +- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 8 + arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 8 + arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 + drivers/net/ethernet/freescale/dpaa2/Kconfig | 3 +- drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c | 242 +++++++++++---------- drivers/net/ethernet/freescale/dpaa2/dprtc-cmd.h | 48 +++- drivers/net/ethernet/freescale/dpaa2/dprtc.c | 191 ++++++++++++---- drivers/net/ethernet/freescale/dpaa2/dprtc.h | 62 ++++-- drivers/ptp/Kconfig | 2 +- 11 files changed, 386 insertions(+), 198 deletions(-) -- 2.7.4
