Hi Jitao
Always good to see more panels added.
On Sat, Jun 08, 2019 at 03:02:29PM +0800, Jitao Shi wrote:
> Add documentation for boe tv101wum-n16 panel.
The changelog says tv101wum-n16 but the compatible says tv101wum-nl6.
Please pick the right one and be consistent. (number one '1' versus
character 'l')
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> .../display/panel/boe,tv101wum-nl6.txt | 34 +++++++++++++++++++
> 1 file changed, 34 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> new file mode 100644
> index 000000000000..2a84735d742d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
> @@ -0,0 +1,34 @@
> +Boe Corporation 10.1" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv101wum"
The example uses "boe,tv101wum-nl6", which matches the filename.
Please fix so it is the same all over.
> +- reg: the virtual channel number of a DSI peripheral
> +- enable-gpios: a GPIO spec for the enable pin
> +- pp1800-supply: core voltage supply
> +- avdd-supply:
> +- avee-supply:
Missing descriptions - please add.
> +- backlight: phandle of the backlight device attached to the panel
> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in
> +media/video-interfaces.txt. This node should describe panel's video bus.
> +
> +Example:
> +&dsi {
> + ...
> + panel@0 {
> + compatible = "boe,tv101wum-nl6";
> + reg = <0>;
> + enable-gpios = <&pio 45 0>;
> + avdd-supply = <&ppvarn_lcd>;
> + avee-supply = <&ppvarp_lcd>;
> + pp1800-supply = <&pp1800_lcd>;
> + backlight = <&backlight_lcd0>;
> + status = "okay";
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> + };
> +};
> \ No newline at end of file
Please add newline.
Sam
