On Wed 05 Jun 10:15 PDT 2019, Sricharan R wrote:
> This patch adds support for the global clock controller found on
> the ipq6018 based devices.
>
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> Signed-off-by: anusha <anusharao@xxxxxxxxxxxxxx>
> Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
Please fix your s-o-b chain, as described in my reply to 1/8..
> ---
> drivers/clk/qcom/Kconfig | 9 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/gcc-ipq6018.c | 5267 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 5277 insertions(+)
> create mode 100644 drivers/clk/qcom/gcc-ipq6018.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index e1ff83c..e5fb091 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -120,6 +120,15 @@ config IPQ_GCC_8074
> i2c, USB, SD/eMMC, etc. Select this for the root clock
> of ipq8074.
>
> +config IPQ_GCC_6018
Please maintain sort order.
> + tristate "IPQ6018 Global Clock Controller"
> + depends on COMMON_CLK_QCOM
> + help
> + Support for global clock controller on ipq6018 devices.
> + Say Y if you want to use peripheral devices such as UART, SPI,
> + i2c, USB, SD/eMMC, etc. Select this for the root clock
> + of ipq6018.
> +
> config MSM_GCC_8660
> tristate "MSM8660 Global Clock Controller"
> help
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index f0768fb..025137d 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
> obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
> obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
> obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
> +obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
Ditto.
> obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
> obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
> obj-$(CONFIG_MDM_LCC_9615) += lcc-mdm9615.o
> diff --git a/drivers/clk/qcom/gcc-ipq6018.c b/drivers/clk/qcom/gcc-ipq6018.c
[..]
> +static int gcc_ipq6018_probe(struct platform_device *pdev)
> +{
> + return qcom_cc_probe(pdev, &gcc_ipq6018_desc);
> +}
> +
> +static int gcc_ipq6018_remove(struct platform_device *pdev)
> +{
> + return 0;
Just omit .remove from the gcc_ipq6018_driver instead of providing a
dummy function.
> +}
> +
> +static struct platform_driver gcc_ipq6018_driver = {
> + .probe = gcc_ipq6018_probe,
> + .remove = gcc_ipq6018_remove,
> + .driver = {
> + .name = "qcom,gcc-ipq6018",
> + .owner = THIS_MODULE,
Don't specify .owner in platform drivers.
[..]
> +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. GCC IPQ6018 Driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:gcc-ipq6018");
This modalias won't be used.
Regards,
Bjorn
