[PATCH v5 01/13] dt-bindings: media: sunxi-ir: Add A31 compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Allwinner A31 has introduced a new memory mapping and a
reset line.

The difference in memory mapping are :

- In the configure register there is a new sample bit
  and Allwinner has introduced the active threshold feature.

- In the status register a new STAT bit is present.

Note: CGPO and DRQ_EN bits are removed on A31 but present on A13
and on new SoCs like A64/H6.
This is actually not an issue as these bits are togglable and new
SoCs have a dedicated bindings.

Introduce this bindings to make a difference since this generation.
And declare the reset line required since A31.

Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
Acked-by: Sean Young <sean@xxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/sunxi-ir.txt | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 278098987edb..2e59a32a7e33 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -1,16 +1,21 @@
 Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
 
 Required properties:
-- compatible	    : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
+- compatible	    :
+	"allwinner,sun4i-a10-ir"
+	"allwinner,sun5i-a13-ir"
+	"allwinner,sun6i-a31-ir"
 - clocks	    : list of clock specifiers, corresponding to
 		      entries in clock-names property;
 - clock-names	    : should contain "apb" and "ir" entries;
 - interrupts	    : should contain IR IRQ number;
 - reg		    : should contain IO map address for IR.
 
+Required properties since A31:
+- resets	    : phandle + reset specifier pair
+
 Optional properties:
 - linux,rc-map-name: see rc.txt file in the same directory.
-- resets : phandle + reset specifier pair
 - clock-frequency  : IR Receiver clock frequency, in Hertz. Defaults to 8 MHz
 		     if missing.
 
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux