Add support to enable CDM (Configuration Dependent Module) register check
for any data corruption based on the device-tree flag 'snps,enable-cdm-check'.
Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
Acked-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx>
Reviewed-by: Thierry Reding <treding@xxxxxxxxxx>
---
Changes since [v8]:
* None
Changes since [v7]:
* None
Changes since [v6]:
* Changed "enable-cdm-check" to "snps,enable-cdm-check"
Changes since [v5]:
* None
Changes since [v4]:
* None
Changes since [v3]:
* None
Changes since [v2]:
* Changed code and commit description to reflect change in flag from
'cdm-check' to 'enable-cdm-check'
Changes since [v1]:
* This is a new patch in v2 series
drivers/pci/controller/dwc/pcie-designware.c | 7 +++++++
drivers/pci/controller/dwc/pcie-designware.h | 9 +++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index d8be6c3339fa..e9a059163034 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -521,4 +521,11 @@ void dw_pcie_setup(struct dw_pcie *pci)
break;
}
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+
+ if (of_property_read_bool(np, "snps,enable-cdm-check")) {
+ val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS);
+ val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS |
+ PCIE_PL_CHK_REG_CHK_REG_START;
+ dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val);
+ }
}
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 45cd7c88d28a..6f555025caf9 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -86,6 +86,15 @@
#define PCIE_MISC_CONTROL_1_OFF 0x8BC
#define PCIE_DBI_RO_WR_EN BIT(0)
+#define PCIE_PL_CHK_REG_CONTROL_STATUS 0xB20
+#define PCIE_PL_CHK_REG_CHK_REG_START BIT(0)
+#define PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS BIT(1)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPARISON_ERROR BIT(16)
+#define PCIE_PL_CHK_REG_CHK_REG_LOGIC_ERROR BIT(17)
+#define PCIE_PL_CHK_REG_CHK_REG_COMPLETE BIT(18)
+
+#define PCIE_PL_CHK_REG_ERR_ADDR 0xB28
+
/*
* iATU Unroll-specific register definitions
* From 4.80 core version the address translation will be made by unroll
--
2.17.1
