Oleh
On 6/7/19 6:48 AM, Oleh Kravchenko wrote:
Add documentation and example for dt-bindings EL15203000.
Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx>
---
.../bindings/leds/leds-el15203000.txt | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-el15203000.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
new file mode 100644
index 000000000000..f47ee91cb419
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
@@ -0,0 +1,48 @@
+Crane Merchandising System - el15203000 LED driver
+--------------------------------------------------
+
+This LED Board (aka RED LEDs board) is widely used in coffee vending machines
+produced by Crane Merchandising Systems.
+
+Required properties:
+- compatible: "crane,el15203000"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
Can you please add this instead?
reg : see Documentation/devicetree/bindings/spi/spi-bus.txt
spi-max-frequency : see Documentation/devicetree/bindings/spi/spi-bus.txt
+LED sub-node properties:
+- label :
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
max-brightness?
That appears to be optional
N
+Example
+-------
+
+led-controller@0 {
+ compatible = "crane,el15203000";
+ reg = <0>;
+ spi-max-frequency = <50000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* water pipe */
+ pipe@50 {
+ reg = <0x50>;
+ label = "red:pipe";
+ max-brightness = <2>;
+ };
+
+ /* screen frame */
+ screen@53 {
+ reg = <0x53>;
+ label = "red:screen";
+ max-brightness = <2>;
+ };
+
+ /* vending area */
+ vend@56 {
+ reg = <0x56>;
+ label = "red:vend";
+ };
+};
