On 6/6/19 8:38 AM, Sébastien Szymanski wrote: > i.MX7 and i.MX6UL/L have the same CSI controller. So add i.MX6UL/L support > to imx7-media-csi driver. > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx> > --- > > Changes for v2: > - rebase on top of linuxtv/master > - mention i.MX6UL/L in header and Kconfig help text > - rename csi_type to csi_soc_id > > drivers/staging/media/imx/Kconfig | 4 +- > drivers/staging/media/imx/imx7-media-csi.c | 62 ++++++++++++++++------ > 2 files changed, 49 insertions(+), 17 deletions(-) > > diff --git a/drivers/staging/media/imx/Kconfig b/drivers/staging/media/imx/Kconfig > index ad3d7df6bb3c..8b6dc42c39e0 100644 > --- a/drivers/staging/media/imx/Kconfig > +++ b/drivers/staging/media/imx/Kconfig > @@ -22,11 +22,11 @@ config VIDEO_IMX_CSI > A video4linux camera sensor interface driver for i.MX5/6. > > config VIDEO_IMX7_CSI > - tristate "i.MX7 Camera Sensor Interface driver" > + tristate "i.MX6UL/L / i.MX7 Camera Sensor Interface driver" > depends on VIDEO_IMX_MEDIA && VIDEO_DEV && I2C > default y Hi, I realize that this "default y" is not part of this patch set, but we have pretty strong guidance that a driver should not default to 'y' unless it is needed for a system to boot. If this driver is optional, then please drop the 2 occurrences of "default y" in this Kconfig file. thanks. > help > Enable support for video4linux camera sensor interface driver for > - i.MX7. > + i.MX6UL/L or i.MX7. > endmenu > endif -- ~Randy
