KeyStone 66AK2H/K 1G Ethernet Switch Subsystems, can control an external multiplexer that selects one of up to 32 clocks for time sync reference (RFTCLK) clock. This feature can be configured through CPTS_RFTCLK_SEL register (offset: x08) in CPTS module and modelled as multiplexer clock. Hence, add cpts-refclk-mux clock node which allows to mux one of SYSCLK2, SYSCLK3, TIMI0, TIMI1, TSREFCLK clocks as CPTS reference clock [1] and group all CPTS properties under "cpts" subnode. [1] http://www.ti.com/lit/gpn/66ak2h14 Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Acked-by: Richard Cochran <richardcochran@xxxxxxxxx> --- arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi index e203145acbea..d5a6c1f5633c 100644 --- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi @@ -152,8 +152,8 @@ netcp: netcp@2000000 { /* NetCP address range */ ranges = <0 0x2000000 0x100000>; - clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>; - clock-names = "pa_clk", "ethss_clk", "cpts"; + clocks = <&clkpa>, <&clkcpgmac>; + clock-names = "pa_clk", "ethss_clk"; dma-coherent; ti,navigator-dmas = <&dma_gbe 22>, @@ -175,6 +175,22 @@ netcp: netcp@2000000 { tx-queue = <648>; tx-channel = "nettx"; + cpts { + clocks = <&cpts_refclk_mux>; + clock-names = "cpts"; + + cpts_refclk_mux: cpts-refclk-mux { + #clock-cells = <0>; + clocks = <&chipclk12>, <&chipclk13>, + <&timi0>, <&timi1>, + <&tsrefclk>; + ti,mux-tbl = <0x0>, <0x1>, <0x2>, + <0x3>, <0x8>; + assigned-clocks = <&cpts_refclk_mux>; + assigned-clock-parents = <&chipclk12>; + }; + }; + interfaces { gbe0: interface-0 { slave-port = <0>; -- 2.17.1
