Hi Hawa, On 06/06/2019 08:53, Hawa, Hanna wrote: > On 5/31/2019 8:14 AM, Borislav Petkov wrote: >> On Fri, May 31, 2019 at 01:15:33AM +0000, Herrenschmidt, Benjamin wrote: >>> This isn't terribly helpful, there's nothing telling anybody which of >>> those files corresponds to an ARM SoC :-) >> >> drivers/edac/altera_edac.c is one example. >> >> Also, James and I have a small writeup on how an arm driver should look >> like, we just need to polish it up and post it. >> >> James? >> >>> That said ... >>> >>> You really want a single EDAC driver that contains all the stuff for >>> the caches, the memory controller, etc... ? >> >> Yap. > > Disagree. The various drivers don't depend on each other. > I think we should keep the drivers separated as they are distinct and independent IP blocks. But they don't exist in isolation, they both depend on the integration-choices/firmware that makes up your platform. Other platforms may have exactly the same IP blocks, configured differently, or with different features enabled in firmware. This means we can't just probe the driver based on the presence of the IP block, we need to know the integration choices and firmware settings match what the driver requires. (Case in point, that A57 ECC support is optional, another A57 may not have it) Descriptions of what firmware did don't really belong in the DT. Its not a hardware property. This is why its better to probe this stuff based on the machine-compatible/platform-name, not the presence of the IP block in the DT. Will either of your separate drivers ever run alone? If they're probed from the same machine-compatible this won't happen. How does your memory controller report errors? Does it send back some data with an invalid checksum, or a specific poison/invalid flag? Will the cache report this as a cache error too, if its an extra signal, does the cache know what it is? All these are integration choices between the two IP blocks, done as separate drivers we don't have anywhere to store that information. Even if you don't care about this, making them separate drivers should only be done to make them usable on other platforms, where these choices may have been different. Thanks, James
