Hi, Shawn
> -----Original Message-----
> From: Shawn Guo <shawnguo@xxxxxxxxxx>
> Sent: Thursday, June 6, 2019 10:18 AM
> To: Anson Huang <anson.huang@xxxxxxx>
> Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; Leonard Crestez
> <leonard.crestez@xxxxxxx>; Aisheng Dong <aisheng.dong@xxxxxxx>;
> viresh.kumar@xxxxxxxxxx; Jacky Bai <ping.bai@xxxxxxx>;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: Re: [PATCH] arm64: dts: imx8mm: Move gic node into soc node
>
> On Mon, Jun 03, 2019 at 09:50:20AM +0800, Anson.Huang@xxxxxxx wrote:
> > From: Anson Huang <Anson.Huang@xxxxxxx>
> >
> > GIC is inside of SoC from architecture perspective, it should be
> > located inside of soc node in DT.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
>
> It doesn't apply to my imx/dt64 branch. Please generate it against that
> branch for my for-next.
OK, just resent the patch based on the correct branch.
Thanks,
Anson.
>
> Shawn
>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mm.dtsi | 18 +++++++++---------
> > 1 file changed, 9 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index dc99f45..429312e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -169,15 +169,6 @@
> > clock-output-names = "clk_ext4";
> > };
> >
> > - gic: interrupt-controller@38800000 {
> > - compatible = "arm,gic-v3";
> > - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
> > - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base +
> SGI_base) */
> > - #interrupt-cells = <3>;
> > - interrupt-controller;
> > - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > - };
> > -
> > psci {
> > compatible = "arm,psci-1.0";
> > method = "smc";
> > @@ -739,6 +730,15 @@
> > dma-names = "rx-tx";
> > status = "disabled";
> > };
> > +
> > + gic: interrupt-controller@38800000 {
> > + compatible = "arm,gic-v3";
> > + reg = <0x38800000 0x10000>, /* GIC Dist */
> > + <0x38880000 0xc0000>; /* GICR (RD_base +
> SGI_base) */
> > + #interrupt-cells = <3>;
> > + interrupt-controller;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > };
> >
> > usbphynop1: usbphynop1 {
> > --
> > 2.7.4
> >
