Re: [PATCH v3 1/2] dt-bindings: interrupt-controller: Amazon's Annapurna Labs FIC

[Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>]

On Wed, 2019-06-05 at 17:59 +0300, Talel Shenhar wrote:
> 

 ../..

> +- compatible: should be "amazon,al-fic"
> +- reg: physical base address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: must be 2.
> +- interrupt-parent: specifies the parent interrupt controller.
> +- interrupts: describes which input line in the interrupt parent, this
> +  fic's output is connected to.
> +
> +Example:
> +
> +amazon_fic: interrupt-controller@0xfd8a8500 {
> +	compatible = "amazon,al-fic";
> +	interrupt-controller;
> +	#interrupt-cells = <1>;
                            ^ should be 2

> +	reg = <0x0 0xfd8a8500 0x0 0x1000>;
> +	interrupt-parent = <&gic>;
> +	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
> +};