[PATCH v8 12/13] ARM: dts: exynos: add DMC device for exynos5422

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add description of Dynamic Memory Controller and PPMU counters.
They are used by exynos5422-dmc driver.
There is a definition of the memory chip, which is then used during
calculation of timings for each OPP.
The algorithm in the driver needs these two sets to bound the timings.

Signed-off-by: Lukasz Luba <l.luba@xxxxxxxxxxxxxxxxxxx>
---
 arch/arm/boot/dts/exynos5420.dtsi             |  79 ++++++++++++
 arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 116 ++++++++++++++++++
 2 files changed, 195 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d153617ff1a3..a18b225c983e 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -235,6 +235,37 @@
 			status = "disabled";
 		};
 
+		dmc: memory-controller@10c20000 {
+			compatible = "samsung,exynos5422-dmc";
+			reg = <0x10c20000 0x100>, <0x10c30000 0x100>;
+			clocks = <&clock CLK_FOUT_SPLL>,
+				 <&clock CLK_MOUT_SCLK_SPLL>,
+				 <&clock CLK_FF_DOUT_SPLL2>,
+				 <&clock CLK_FOUT_BPLL>,
+				 <&clock CLK_MOUT_BPLL>,
+				 <&clock CLK_SCLK_BPLL>,
+				 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+				 <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
+				 <&clock CLK_MOUT_MCLK_CDREX>,
+				 <&clock CLK_DOUT_CLK2X_PHY0>,
+				 <&clock CLK_CLKM_PHY0>,
+				 <&clock CLK_CLKM_PHY1>;
+			clock-names = "fout_spll",
+				      "mout_sclk_spll",
+				      "ff_dout_spll2",
+				      "fout_bpll",
+				      "mout_bpll",
+				      "sclk_bpll",
+				      "mout_mx_mspll_ccore",
+				      "mout_mx_mspll_ccore_phy",
+				      "mout_mclk_cdrex",
+				      "dout_clk2x_phy0",
+				      "clkm_phy0",
+				      "clkm_phy1";
+			samsung,syscon-clk = <&clock>;
+			status = "disabled";
+		};
+
 		nocp_mem0_0: nocp@10ca1000 {
 			compatible = "samsung,exynos5420-nocp";
 			reg = <0x10CA1000 0x200>;
@@ -271,6 +302,54 @@
 			status = "disabled";
 		};
 
+		ppmu_dmc0_0: ppmu@10d00000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d00000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
+					event-name = "ppmu-event3-dmc0_0";
+				};
+			};
+		};
+
+		ppmu_dmc0_1: ppmu@10d10000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d10000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
+					event-name = "ppmu-event3-dmc0_1";
+				};
+			};
+		};
+
+		ppmu_dmc1_0: ppmu@10d60000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d60000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
+					event-name = "ppmu-event3-dmc1_0";
+				};
+			};
+		};
+
+		ppmu_dmc1_1: ppmu@10d70000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d70000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
+					event-name = "ppmu-event3-dmc1_1";
+				};
+			};
+		};
+
 		gsc_pd: power-domain@10044000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10044000 0x20>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 25d95de15c9b..30e569c13ee7 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -34,6 +34,97 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dmc_opp_table: opp_table2 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <165000000>;
+			opp-microvolt = <875000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <206000000>;
+			opp-microvolt = <875000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <875000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <413000000>;
+			opp-microvolt = <887500>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <543000000>;
+			opp-microvolt = <937500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <633000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <728000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	samsung_K3QF2F20DB: lpddr3 {
+		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+		density		= <16384>;
+		io-width	= <32>;
+		#address-cells  = <1>;
+		#size-cells     = <0>;
+
+		tRFC-min-tck		= <17>;
+		tRRD-min-tck		= <2>;
+		tRPab-min-tck		= <2>;
+		tRPpb-min-tck		= <2>;
+		tRCD-min-tck		= <3>;
+		tRC-min-tck		= <6>;
+		tRAS-min-tck		= <5>;
+		tWTR-min-tck		= <2>;
+		tWR-min-tck		= <7>;
+		tRTP-min-tck		= <2>;
+		tW2W-C2C-min-tck	= <0>;
+		tR2R-C2C-min-tck	= <0>;
+		tWL-min-tck		= <8>;
+		tDQSCK-min-tck		= <5>;
+		tRL-min-tck		= <14>;
+		tFAW-min-tck		= <5>;
+		tXSR-min-tck		= <12>;
+		tXP-min-tck		= <2>;
+		tCKE-min-tck		= <2>;
+		tCKESR-min-tck		= <2>;
+		tMRD-min-tck		= <5>;
+
+		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+			compatible	= "jedec,lpddr3-timings";
+			reg		= <800000000>; /* workaround: it shows max-freq */
+			min-freq	= <100000000>;
+			tRFC		= <65000>;
+			tRRD		= <6000>;
+			tRPab		= <12000>;
+			tRPpb		= <12000>;
+			tRCD		= <10000>;
+			tRC		= <33750>;
+			tRAS		= <23000>;
+			tWTR		= <3750>;
+			tWR		= <7500>;
+			tRTP		= <3750>;
+			tW2W-C2C	= <0>;
+			tR2R-C2C	= <0>;
+			tFAW		= <25000>;
+			tXSR		= <70000>;
+			tXP		= <3750>;
+			tCKE		= <3750>;
+			tCKESR		= <3750>;
+			tMRD		= <7000>;
+		};
+	};
 };
 
 &adc {
@@ -132,6 +223,15 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&dmc {
+	devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+			<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+	device-handle = <&samsung_K3QF2F20DB>;
+	operating-points-v2 = <&dmc_opp_table>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
@@ -540,6 +640,22 @@
 	};
 };
 
+&ppmu_dmc0_0 {
+	status = "okay";
+};
+
+&ppmu_dmc0_1 {
+	status = "okay";
+};
+
+&ppmu_dmc1_0 {
+	status = "okay";
+};
+
+&ppmu_dmc1_1 {
+	status = "okay";
+};
+
 &tmu_cpu0 {
 	vtmu-supply = <&ldo7_reg>;
 };
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux