Re: [PATCH] ARM: dts: imx7d-sdb: Make SW2's voltage fixed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 29, 2019 at 02:50:56PM +0800, Anson.Huang@xxxxxxx wrote:
> From: Anson Huang <Anson.Huang@xxxxxxx>
> 
> On i.MX7D SDB board, SW2 supplies a lot of peripheral devices,
> its voltage should be fixed at 1.8V. The commit 43967d9b5a7c
> ("ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs")
> assigns SW2 as the supplier of vdd1p0d, and when its comsumers
> pcie-phy/mipi-phy try to set the vdd1p0d to 1.0V, regulator core
> will also set SW2 to its best(min) voltage to 1.5V, and it will
> lead to board reset.
> 
> This patch makes SW2's voltage fixed at 1.8V to avoid this issue.
> 
> Fixes: 43967d9b5a7c ("ARM: dts: imx7d-sdb: Assign corresponding power supply for LDOs")
> Reported-by: Leonard Crestez <leonard.crestez@xxxxxxx>
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>

Applied, thanks.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux