On Fri, May 24, 2019 at 06:26:45PM +0200, Ard Biesheuvel wrote: > The Socionext SynQuacer based 96boards DeveloperBox platform does not > incorporate a random number generator, but it does have a 96boards low > speed connector which supports extension boards such as the Secure96, > which has a TPM and some crypto accelerators, one of which incorporates > a random number generator. > > This series implements support for the RNG part, which is one of several > functions of the Atmel SHA204A I2C crypto accelerator, and wires it up so > both DT and ACPI based boot methods can use the device. > > v2: > - update DT binding patches so the SHA204A and ECC508A module bindings are > in trivial-devices.yaml. > - add acks from Linus and Mika > > Assuming Rob is ok now with the DT binding patches, can we please take > this through the crypto tree? > > Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> > Cc: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> > > Ard Biesheuvel (6): > i2c: acpi: permit bus speed to be discovered after enumeration > crypto: atmel-ecc: add support for ACPI probing on non-AT91 platforms > crypto: atmel-ecc: factor out code that can be shared > crypto: atmel-i2c: add support for SHA204A random number generator > dt-bindings: add Atmel SHA204A I2C crypto processor > dt-bindings: move Atmel ECC508A I2C crypto processor to > trivial-devices > > Documentation/devicetree/bindings/crypto/atmel-crypto.txt | 13 - > Documentation/devicetree/bindings/trivial-devices.yaml | 4 + > drivers/crypto/Kconfig | 19 +- > drivers/crypto/Makefile | 2 + > drivers/crypto/atmel-ecc.c | 403 ++------------------ > drivers/crypto/atmel-ecc.h | 116 ------ > drivers/crypto/atmel-i2c.c | 364 ++++++++++++++++++ > drivers/crypto/atmel-i2c.h | 196 ++++++++++ > drivers/crypto/atmel-sha204a.c | 171 +++++++++ > drivers/i2c/i2c-core-acpi.c | 6 +- > 10 files changed, 781 insertions(+), 513 deletions(-) > delete mode 100644 drivers/crypto/atmel-ecc.h > create mode 100644 drivers/crypto/atmel-i2c.c > create mode 100644 drivers/crypto/atmel-i2c.h > create mode 100644 drivers/crypto/atmel-sha204a.c All applied. Thanks. -- Email: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> Home Page: http://gondor.apana.org.au/~herbert/ PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
