The GPIO Input Buffer Enable register is used to control the input enable of each individual GPIO port. When an individual GPIO port's direction is set to input (GPIO_GPDIR[DRn=0]), the associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate the port value to the GPIO Data Register. This patch enable port input and interrupt. Signed-off-by: Zhang Ying-22455 <ying.zhang22455@xxxxxxx> Signed-off-by: Chuanhua Han <chuanhua.han@xxxxxxx> --- drivers/gpio/gpio-mpc8xxx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index c8673a5d9412..555e0e7957d9 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -373,9 +373,10 @@ static int mpc8xxx_probe(struct platform_device *pdev) if (!mpc8xxx_gc->irq) return 0; - /* ack and mask all irqs */ + /* ack and enable irqs */ gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, 0xffffffff); - gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0); + gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0xffffffff); + gc->write_reg(mpc8xxx_gc->regs + GPIO_ICR2, 0xffffffff); irq_set_chained_handler_and_data(mpc8xxx_gc->irqn, mpc8xxx_gpio_irq_cascade, mpc8xxx_gc); -- 2.17.1
