From: Anson Huang <Anson.Huang@xxxxxxx> NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system controller, the system controller is in charge of system power, clock and thermal sensors etc. management, Linux kernel has to communicate with system controller via MU (message unit) IPC to get temperature from thermal sensors, this patch adds binding doc for i.MX system controller thermal driver. Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- No change, just rebase the patch to top of linux-next and based on my watchdog patch: https://patchwork.kernel.org/patch/10962183/ --- .../devicetree/bindings/arm/freescale/fsl,scu.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index a575e42..fc3844e 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -155,6 +155,17 @@ Required properties: Optional properties: - timeout-sec: contains the watchdog timeout in seconds. +Thermal bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: Should be : + "fsl,imx8qxp-sc-thermal" + followed by "fsl,imx-sc-thermal"; + +- #thermal-sensor-cells: See Documentation/devicetree/bindings/thermal/thermal.txt + for a description. + Example (imx8qxp): ------------- aliases { @@ -222,6 +233,11 @@ firmware { compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; timeout-sec = <60>; }; + + tsens: thermal-sensor { + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; }; }; -- 2.7.4
