On Tue, May 21, 2019 at 4:51 PM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
>
> Hi,
>
> Here's the V12 of my patchset to add support for the Timer/Counter Unit
> (TCU) present on the JZ47xx SoCs from Ingenic.
>
> This patchset is much shorter at only 13 patches vs. 27 patches in V11;
> the remaining patches will be sent in parallel (if applicable) or as a
> follow-up patchset once this one is merged.
>
> In V11 the clocksource maintainers weren't happy with the size of the
> ingenic-timer driver, which included clocks and irqchip setup code.
> On the other hand, devicetree maintainers wanted one single node for
> the TCU hardware since it's effectively just one hardware block.
>
> In this patchset the functionality is cut in four different drivers:
> a MFD one to provide the regmap, probe the children and which provides
> several API functions; a clocks driver; a irqchip driver; a clocksource
> driver. All these drivers work with the same regmap, have the same
> compatible strings, and will probe _with the same devicetree node_.
For the series:
Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
System: MIPS Creator CI20
For reference, here is my local patch:
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi
b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 1bfac58da5df..e7b7da32f278 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
#include <dt-bindings/dma/jz4780-dma.h>
/ {
@@ -80,6 +81,15 @@
interrupt-parent = <&intc>;
interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4780-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
};
rtc_dev: rtc@10003000 {
@@ -287,14 +297,6 @@
status = "disabled";
};
- watchdog: watchdog@10002000 {
- compatible = "ingenic,jz4780-watchdog";
- reg = <0x10002000 0x10>;
-
- clocks = <&cgu JZ4780_CLK_RTCLK>;
- clock-names = "rtc";
- };
-
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;
> Regards,
> -Paul
>
>
