Allwinner A31 has introduced a new memory mapping and a reset line. The difference in memory mapping are : - In the configure register there is a new sample bit and Allwinner has introduced the active threshold feature. - In the status register a new STAT bit is present. Note: CGPO and DRQ_EN bits are removed on A31 but present on A13 and on new SoCs like A64/H6. This is actually not an issue as these bits are togglable and new SoCs have a dedicated bindings. Introduce this bindings to make a difference since this generation. And declare the reset line required since A31. Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx> --- Documentation/devicetree/bindings/media/sunxi-ir.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 278098987edb..2e59a32a7e33 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -1,16 +1,21 @@ Device-Tree bindings for SUNXI IR controller found in sunXi SoC family Required properties: -- compatible : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir" +- compatible : + "allwinner,sun4i-a10-ir" + "allwinner,sun5i-a13-ir" + "allwinner,sun6i-a31-ir" - clocks : list of clock specifiers, corresponding to entries in clock-names property; - clock-names : should contain "apb" and "ir" entries; - interrupts : should contain IR IRQ number; - reg : should contain IO map address for IR. +Required properties since A31: +- resets : phandle + reset specifier pair + Optional properties: - linux,rc-map-name: see rc.txt file in the same directory. -- resets : phandle + reset specifier pair - clock-frequency : IR Receiver clock frequency, in Hertz. Defaults to 8 MHz if missing. -- 2.20.1
