Hi! > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + led1 { > + label = "LED 1"; > + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + }; > + }; I had comments about these... > + vibrator { > + compatible = "gpio-vibrator"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_haptic>; > + enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; > + vcc-supply = <®_3v3_p>; > + }; Thanks! > + charger@6b { /* bq25896 */ > + compatible = "ti,bq25890"; > + reg = <0x6b>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_charger>; > + interrupt-parent = <&gpio3>; > + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; > + ti,battery-regulation-voltage = <4192000>; /* 4.192V */ > + ti,charge-current = <1600000>; /* 1.6 A */ > + ti,termination-current = <66000>; /* 66mA */ > + ti,precharge-current = <1300000>; /* 1.3A */ > + ti,minimum-sys-voltage = <2750000>; /* 2.75V */ > + ti,boost-voltage = <5000000>; /* 5V */ > + ti,boost-max-current = <50000>; /* 50mA */ > + }; And this. Did they get lost somewhere? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature